Hoover keymatic 3226
Hoover Keymatic 3226 question
- Thread starter foraloysius
- Start date
Help Support :
Hoover keymatic 3226
ATH Programme Switch (Type 2)
ATH Programme Switch (Type 2)
Hoover keymatic 3226
ATH Programme Switch (Type 2)
ATH Programme Switch (Type 2)
Hoover keymatic 3226
ATH Programmer Switch (Type 3)
ATH Programmer Switch (Type 3)
Hoover keymatic 3226
ATH Programmer Switch (Type 3)
ATH Programmer Switch (Type 3)
Hoover keymatic 3226
ATH Programme Switch (Type 4 )
ATH Programme Switch (Type 4 )
Hoover keymatic 3226
ATH Programme Switch (Type 4 )
ATH Programme Switch (Type 4 )
Hoover keymatic 3226
We can narrow down the harness types to D and E to go with the above programmers,
D = where machine has NO Distribution Block On Top Chassis
E = where machine has NO Distribution Blocks on top or bottom fitted
We can narrow down the harness types to D and E to go with the above programmers,
D = where machine has NO Distribution Block On Top Chassis
E = where machine has NO Distribution Blocks on top or bottom fitted
Hoover keymatic 3226
Hoover keymatic 3226
Hoover keymatic 3226
Hope this helps, these are all the wiring and programmer charts related to the UK 3226 anything else required please ask!!
Hope this helps, these are all the wiring and programmer charts related to the UK 3226 anything else required please ask!!
Oh Mike, thank you!! That's great! I will get in touch with Stephan, I hope this is what he is looking for.
Stephan says thank you, it appears he has type D. Still funny, he seems to have a different timer, the increments are different. Probably a replacement.
The timer is working but it looks like it needs a good cleaning, he will do that soon.
After the restoration is finished this Keymatic will go to a collector in Stuttgart. He has a Keymatic 3224 now that is in a bad state. Stephan wants to restore that one too. I will start a new thread about that soon.
The timer is working but it looks like it needs a good cleaning, he will do that soon.
After the restoration is finished this Keymatic will go to a collector in Stuttgart. He has a Keymatic 3224 now that is in a bad state. Stephan wants to restore that one too. I will start a new thread about that soon.
Here's one more thing, the timer stays much longer in every last pump only increment than it says in the schedule. Would that be normal or is this an indication for a problem? In the end the machine advances by itself, but it takes quite a bit of time. Sometimes it takes 5 minutes. According to the schedule it should be 2 minutes. Here's a video:
Above problem seems to have been solved. Stephan cleaned the timer, it now takes 2.5 minutes to the next increment.
