electron1100
Well-known member
Hello quick question is the drum capacity 4.5KG or the slightly larger 5Kg one
Thanks
Gary
Thanks
Gary
Hoover Logic A8534 Capacity?
- Thread starter electron1100
- Start date
Help Support :
Hi.
Don't see many of us UK residents here very often which is a shame.
Anyway, I think k from memory it has the later 5kg drum. Don't hold me to that though as my memory nowadays is awful.
Come on people, this is a fantastic place of knowledge (and some opinions also
) which comes in very useful at times. It can also be an entertaining read to loose yourself in when the daily grind gets to much ha ha ha.
Rant over, sorry .
Don't see many of us UK residents here very often which is a shame.
Anyway, I think k from memory it has the later 5kg drum. Don't hold me to that though as my memory nowadays is awful.
Come on people, this is a fantastic place of knowledge (and some opinions also
) which comes in very useful at times. It can also be an entertaining read to loose yourself in when the daily grind gets to much ha ha ha.Rant over, sorry .
May have it wrong
But IIRC many members from other side of pond are on various Facebook groups nowadays. This in addition and or instead of....
But IIRC many members from other side of pond are on various Facebook groups nowadays. This in addition and or instead of....
keymatic3203
Well-known member
Hi Gary
according to the service/parts book, that's a logic 1300 washer dryer with a 5kg load, the drums are about 4cm deeper than the 4.5kg drums. I measured one for you on the weekend.
Mathew
according to the service/parts book, that's a logic 1300 washer dryer with a 5kg load, the drums are about 4cm deeper than the 4.5kg drums. I measured one for you on the weekend.
Mathew
electron1100
Well-known member
How Big Is It
Thanks to all who replied, it is too big.......dam and dam again.
I have been looking for a suitable drum for a Hoover 1100 either the early roller bearing type of the later ball bearing type, I think mine is dying as there appears to wear on the spider shaft, I just want to swap it out as I and a certain engineer from Cardiff are sick of changing the bearings and tubdrum seal, I suppose 35 years is a good life (he said grudgingly)
Gary
Thanks to all who replied, it is too big.......dam and dam again.
I have been looking for a suitable drum for a Hoover 1100 either the early roller bearing type of the later ball bearing type, I think mine is dying as there appears to wear on the spider shaft, I just want to swap it out as I and a certain engineer from Cardiff are sick of changing the bearings and tubdrum seal, I suppose 35 years is a good life (he said grudgingly)
Gary
optima
Well-known member
A8564
As if you didn't already know the capacity Gary.
Really finding this once so great site so Amecicano.
As if you didn't already know the capacity Gary.
Really finding this once so great site so Amecicano.
electron1100
Well-known member
The Shame
Optima yes I know...............I am just getting more fuddly and confused as the years go by.
That was a great video
Gary
Optima yes I know...............I am just getting more fuddly and confused as the years go by.
That was a great video
Gary
