hotpoint9506
New member
- Joined
- Jun 24, 2012
- Messages
- 4
When were the Hotpoint 9506 models made and if any one is selling one i am in Colchester,Essex.
Many Thanks
Many Thanks
Hotpoint 9506
- Thread starter hotpoint9506
- Start date
Help Support :
electron1100
Well-known member
Hotpoint
hello if you scroll down to the Hotpoint washers & dryers thread you should find your model in that
hello if you scroll down to the Hotpoint washers & dryers thread you should find your model in that
hotpoint9506
New member
- Joined
- Jun 24, 2012
- Messages
- 4
What thread is that under? Have only just joined the site so still navigating my way round the site.
paulc
Well-known member
Here's the link.
www.automaticwasher.org
Hotpoint UK Washers & Dryers - 1st Automatic to final New Generation
Noticing that there is discussion going on about the 95's and WM's in the blue forum, it has motivated me to start a Hotpoint history thread. In a similar vein to the Hoover thread that I did last year, I will try to cover all of Hotpoint's washers and dryers and washer/dryers, produced from...
www.automaticwasher.org
hotpoint9506
New member
- Joined
- Jun 24, 2012
- Messages
- 4
@ Paulc its not listed in there yet. The machines have only got up to the 18 series.
matchboxpaul
Well-known member
Hi Ben.
This was the basic Hotpoint 95 800 ELECTRONIC and came in two versions, both of which were some sort of exclusive model.
The original 9506 was introduced in December 1992, to the usual style of 95 design as shown below, with textured fascia panel and metal lid, with lid side strip trims...
This was the basic Hotpoint 95 800 ELECTRONIC and came in two versions, both of which were some sort of exclusive model.
The original 9506 was introduced in December 1992, to the usual style of 95 design as shown below, with textured fascia panel and metal lid, with lid side strip trims...
matchboxpaul
Well-known member
The second version 9506 was introduced in August 1994 and was restyled to match the new AQUARIUS 95-series machines.
This resulted in the fascia going to shiny gloss plastic and the AQUARIUS style of powder drawer was also used, with the following result.
The 9506 was NOT an AQUARIUS machine though!
Hope the above helps.
As to acquring one, the only suggestion is to keep an eye on ebay as that is the only place that I have ever seen them.
However the last year has seen the 95's become very few and far between, with even the later WM Vogue series of machines from the late 1990s becoming much rarer too.
Keep your eyes peeled!
Paul
This resulted in the fascia going to shiny gloss plastic and the AQUARIUS style of powder drawer was also used, with the following result.
The 9506 was NOT an AQUARIUS machine though!
Hope the above helps.
As to acquring one, the only suggestion is to keep an eye on ebay as that is the only place that I have ever seen them.
However the last year has seen the 95's become very few and far between, with even the later WM Vogue series of machines from the late 1990s becoming much rarer too.
Keep your eyes peeled!
Paul
henrypeter21
Well-known member
- Joined
- Oct 13, 2011
- Messages
- 155
95 Series
Its a shame that these machines are no longer made. The 9506 you just posted above would do me perfectly!! It would last long and keep me going for years! If Indesit did not purchase hotpoint, Than these long lasting machines would have been made for much longer!
Thanks for posting these pics!
Its a shame that these machines are no longer made. The 9506 you just posted above would do me perfectly!! It would last long and keep me going for years! If Indesit did not purchase hotpoint, Than these long lasting machines would have been made for much longer!
Thanks for posting these pics!
The model immediately before these was better as it had an ordinary electric interlock rather than the horrible mechanical gubbins these used. The previous door seal was also more substantial so less inclined to go in holes after a few years hard use.
