Is this a bad bearing?

[dlew56]

Hi,

Our washer agitates fine, but gets hung up during the spin cycle. Even once it gets going with some help, it makes a ton of racket and slams back-and-forth when empty.

I took the transmission out.

Here is a video of the brake assembly rotating:



Is this a bad bearing?

Thanks
David

 

[wayupnorth]

What GE washer is it? Pictures of the machine and model number can help you answer alot more.

 

[dlew56]

It’s a wjsr2070b2ww GE washer and the transmission is WH38X10002

It’s taken apart right now

 

[deltablu]

Likely a bad trans. When these spin they make a loud hollow noise that is a dead giveaway for bearing failure. It'd be easier to know if that's all you have bad if there was vid of it in the machine while spinning.

 

[combo52]

Noisey GE Washer

The disk you are spinning has a good bearing and is not the cause of your noise problem, it sounds like that the basket may be broken loose, normally a bad bearing will make a ton of noise but the tub assembly will not thrash about, but again a video of the machine operating would help a lot.

John L.

 

[hailiejade]

Answer

It'd be easier to know if that's all you seo have bad if there was vid!

 

[hailiejade]

It'd be easier to know if that's all you
seo have bad if there was vid!

SEOPlanner

SEOplanner help websites in any niche to rank higher on Google.<br> We sell monthly plans that help from individuals to large corporations to get more organic traffic, and therefore more leads, sales and business.

www.seoplanner.com