Kenmore he3 411

[kenmore81]

Im having a brain fart, I can't remeber wich 2 buttons to press to go into test mode on my he3 .
Any info is apprciated
Kenny

 

[thomasortega]

Don't worry, you're not alone!

It happens to me too all the times.

I just can't remember how do enter the test mode on my Affinity too. Every time i have to call my friends or get the user guide. 10 minutes after that, I can't remember anymore.

Try Gingko Biloba, dear. At least in my case, it works great for the problems Dr. Rolón or Dr. Rovilson can't solve. LOL

 

[jeffg]

I found info for the HE3t Elite:

Dryer:

ACTIVATING THE DIAGNOSTIC TEST MODE

1. Make sure that the dryer is in the “Standby”
mode (plugged in and all of the indicators
are off).

2. Press the following control panel keypad
sequence all within 5 seconds:

More Time—Less Time—More Time—Less Time.

3. All indicators on the console should now
be illuminated with “88” showing in
the “Estimated Time Remaining” display,
if this test mode has been entered successfully.

Procedure for the washer is on pg 7 here:

http://https//www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208182277.pdf

 

[jeffg]

Sorry, that link should be:

Appliantology.org - A Master Samurai Tech Appliance Repair Dojo

 

[jeffg]

Jeez. One more time.

http://www.servicematters.com/docs/wiring/Tech%20Sheet%20-%208182277.pdf

 

[kenmore81]

Thank you Tom and Jeff!!!
Ill try those

 

[kenmore81]

Jeff

I put the model # in and cannot fid any info. The link takes me to property damag liability? Mabe im doing something wrong because my adobe sux. Ill try another computer later.

 

[jeffg]

Here's the relevant part:

 

[kenmore81]

Thank You

Jeff,I dk why I couldn't get that on my end.