brianl
Well-known member
Another shot of the water bellow where I knicked it.
Look what I found!
- Thread starter brianl
- Start date
Help Support :
brianl
Well-known member
Top of the water bellow.
brianl
Well-known member
Here's the ring and another piece.
brianl
Well-known member
Oil bellow mess!
brianl
Well-known member
Cleaned up oil mess a bit. Cannot get nut loose and I see many tabs. Bent two down but I think I messed something up.
All the tabs should be level to release the nut. When one is bent up it locks the nut in place. Carefully bend it down. Then you should be able to unscrew that nut.
It would be a good idea to put a good wrapping of tape or some other padding around the threads at the top of the pulsator shaft, just to be sure the threads don't get damaged while you are working on the mechanism!
brianl
Well-known member
Those 2 on the left were level and so were the rest. I bent them down with a screwdriver and hammer. They face the bottom of the tub now. I think I did something wrong.
Well, they got bent too far down. Carefully bring them up to level (completely horizontal).
Use a plier and slowly bend them so they don't break off.
brianl
Well-known member
All the tabs look like the one at the 5 o'clock position. I bent the ones down at the 7 & 9 o' clock positions.
brianl
Well-known member
Just saw your post, I will have to do that another day. I got tired after 2 hours of this lol. Is my water bellow ok, due to me nicking it?
The five o' clock position is bent up to lock the nut on. It needs to be brought down to level. The 7 and 9 o'clock tabs were o.k. to begin with so you will need to bend them back to where they were at a level position.
Brian
BTW check your e-mail please.
BTW check your e-mail please.
brianl
Well-known member
Why do I feel I am going to need one of those too when putting this all back together?
Opps. Again I am unable to get an e-mail to you at the address given.
Well, don't get discouraged. Its too early in the game for that! Just you wait!
brianl
Well-known member
Hey Gyrafoam:
Did you just send me one, or earlier before around 8:20?
Did you just send me one, or earlier before around 8:20?
No, but I tried the other day and the same thing happend. I got a notife from the "mail admin" that it could not be delivered.
I have requested our friend in Brazil to give you my e-mail address.
Similar threads
