ordered... to be delivered!
Maytag Dependable Care
- Thread starter gadgetgary
- Start date
gmmcnair
Well-known member
Congratulations!!!!
IMHO...just about the best top loader still in production.
IMHO...just about the best top loader still in production.
I would still rather have an older, say 06 model. There should be dealers or reconditioners who sell them.
Peter, Do you ever remove the access panel or whatever on the top loaders in your 'mat that are oversudsed so much to hose out the residue on the baseplate?
Peter, Do you ever remove the access panel or whatever on the top loaders in your 'mat that are oversudsed so much to hose out the residue on the baseplate?
Yay!
The Dependable care is in. Now just making some room.
Should it be Neptune FL, Dependable Care TL and Neptune dryer?
Decisions, Decisions, Decisions
(KA rescue in the right foreground)
The Dependable care is in. Now just making some room.
Should it be Neptune FL, Dependable Care TL and Neptune dryer?
Decisions, Decisions, Decisions
(KA rescue in the right foreground)
peterh770
Well-known member
Tom: Let sleeping dogs lie! There are more than enough things that go wrong in a laundromat (store, not Westinghouse) that removing the front panels to clean inside the machine is far, far down low on the list of things to do, so low you might say it isn't even on the list! Unjamming coin jams and keeping the Wascomat drains free of bra wires is a fulltime job in itself!
Gary--- Welcome to the "one TL and one FL washer" club! I love having both to play with; it's great fun. Looking forward to pics of your new TL. Oh, and only 20 years and it's a vintage machine!
And only 20 years and it's a vintage machine!
Or maybe
TL, FL, Dryer
Or maybe
TL, FL, Dryer
The Good The Bad and The Ugly
My grandparents came from Holland. Grandma bought a gas powered Maytag from a door to door salesman who delivered it on a horse drawn wagon. Mom got her mother's old Maytag after we got running water.
My mother had a Maytag automatic I purchased in 1972 that was replaced in 1997 when Ernst Hardware went out of business and mom bought the new one, an early plastic tub Performa for 137.00. The old Maytag was gifted to a neighbor. Both washers are still working. One repair on the 72, none on the 97. My mother also has the matching dryer, a Maytag side by side and a Maytag dishwasher. No repairs on any of them
I bought a set in 75, sold it when I moved to the midwest and bought another Maytag in 1979. Last model with a lighted panel before the design change. It still runs, with a daughter's friend. It did have a transmission overhaul in 93. I bought a new Atlantis in 2000. It had a timer replacement under recall, no cost. My ex wife still uses it, no repairs. I had the matching dryers, the first Maytag refrigerator ever sold in Washington state, multiple dishwashes, belt drive and modern, disposers and a Maytag stove. No problems.
My sister just bought a blue Maytag Legacy set, in July, for an amazing set price of $775.00. Stainless tub, autotemp controls, lighted drum in the dryer etc.
Gary, you are immaculate, follow manufacturers recommendations and nurture your appliances. You will be very happy and have no problems with your Maytag Dependable care washer.
Just read every post. For everone that has a bad Maytag experience 400 have a good one. 30 hate shredmores and thier relatives and a million swear by them.
1. Satisfaction is influenced by mind and soul of the participant.
2. Treating any appliance with repect and not stressing it's tolerance lays the foundation for satisfactory performance.
3. None of us are buying a "pig in a poke". Data and opinions abound.
4. There is just no 'splainin some folks.
Kelly
My grandparents came from Holland. Grandma bought a gas powered Maytag from a door to door salesman who delivered it on a horse drawn wagon. Mom got her mother's old Maytag after we got running water.
My mother had a Maytag automatic I purchased in 1972 that was replaced in 1997 when Ernst Hardware went out of business and mom bought the new one, an early plastic tub Performa for 137.00. The old Maytag was gifted to a neighbor. Both washers are still working. One repair on the 72, none on the 97. My mother also has the matching dryer, a Maytag side by side and a Maytag dishwasher. No repairs on any of them
I bought a set in 75, sold it when I moved to the midwest and bought another Maytag in 1979. Last model with a lighted panel before the design change. It still runs, with a daughter's friend. It did have a transmission overhaul in 93. I bought a new Atlantis in 2000. It had a timer replacement under recall, no cost. My ex wife still uses it, no repairs. I had the matching dryers, the first Maytag refrigerator ever sold in Washington state, multiple dishwashes, belt drive and modern, disposers and a Maytag stove. No problems.
My sister just bought a blue Maytag Legacy set, in July, for an amazing set price of $775.00. Stainless tub, autotemp controls, lighted drum in the dryer etc.
Gary, you are immaculate, follow manufacturers recommendations and nurture your appliances. You will be very happy and have no problems with your Maytag Dependable care washer.
Just read every post. For everone that has a bad Maytag experience 400 have a good one. 30 hate shredmores and thier relatives and a million swear by them.
1. Satisfaction is influenced by mind and soul of the participant.
2. Treating any appliance with repect and not stressing it's tolerance lays the foundation for satisfactory performance.
3. None of us are buying a "pig in a poke". Data and opinions abound.
4. There is just no 'splainin some folks.
Kelly
washertalk
Well-known member
- Joined
- Oct 14, 2006
- Messages
- 837
the mind wanders
a "pig in a poke". ? ~~
a "pig in a poke". ? ~~
toggleswitch
Well-known member
Now a pig OF a poke.....
simply means you had too much to drink and chose a partner carelessly.
(Ducks and runs)
simply means you had too much to drink and chose a partner carelessly.
(Ducks and runs)
Kelly,
Do you know from what part of Holland your grandparents came?
Do you know from what part of Holland your grandparents came?
washertalk
Well-known member
- Joined
- Oct 14, 2006
- Messages
- 837
LOL, seriously ~~ :-(
I guess the image that came to mind, after quickly rejecting the beastiality thoughts, was a combination of the 3 posts before this one. (lol)
I was thinking....(my mind is warped I'm sure)
about,
about the young cute southern republican gentlemen who is heterosexually married yet finds himself....
in a
in a .... bent over, bare bottom, predicament... receiving certain... service..... Ah, OH....
How could I go there..... I, I,...I'm just.... (sigh).
Shame on me, I know.
I hope that... I will pray for forgiveness for my sinful thoughts.....I'm, I'm just...
I hope that in writing this out this hole, Ah, I mean whole thought leaves my body.
sigh
(hum)
"love is in the air,
everywhere I look around.
Love is in the air,
Every sight and every sound
..."
Does anyone know Randy?
http://
I guess the image that came to mind, after quickly rejecting the beastiality thoughts, was a combination of the 3 posts before this one. (lol)
I was thinking....(my mind is warped I'm sure)
about,
about the young cute southern republican gentlemen who is heterosexually married yet finds himself....
in a
in a .... bent over, bare bottom, predicament... receiving certain... service..... Ah, OH....
How could I go there..... I, I,...I'm just.... (sigh).
Shame on me, I know.
I hope that... I will pray for forgiveness for my sinful thoughts.....I'm, I'm just...
I hope that in writing this out this hole, Ah, I mean whole thought leaves my body.
sigh
(hum)
"love is in the air,
everywhere I look around.
Love is in the air,
Every sight and every sound
..."
Does anyone know Randy?
http://
toggleswitch
Well-known member
Ok so why is a jail called a "pokey"
Is that what happens if you let your guard down?
Is that what happens if you let your guard down?
Getting ready for the Big Day
A week from tomorrow.
Will be able to hook up both the TL and FL.
Yay!
A week from tomorrow.
Will be able to hook up both the TL and FL.
Yay!
toggleswitch
Well-known member
Slow wash / Fast spin.
CONGRATS Gadget!
How about chosign the Slow /Slow speed option followed by a spin in your Maytag front-loader?
CONGRATS Gadget!
How about chosign the Slow /Slow speed option followed by a spin in your Maytag front-loader?
toggleswitch
Well-known member
17 cycles?
oh PUH-LEASE Mary... perhaps 3 is a better choice of descriptions.
oh PUH-LEASE Mary... perhaps 3 is a better choice of descriptions.
Maytag
Line-up
Line-up
toggleswitch
Well-known member
Very handsome!
hoover1060
Well-known member
- Joined
- Apr 9, 2005
- Messages
- 3,309
Looks great Gary!
My mom has a Dependable care Maytag from 1996(replaced her gold A608set) Mom's is a basic machine, one speed, 3 cycles, 3 temps and infinite water levels. Hard to believe those machines are 10 years old this year, but they are! I don't know that the quality is the same as on the old machine, but mom's never had any problems with the washer or dryer!
Good luck with your new machine!
My mom has a Dependable care Maytag from 1996(replaced her gold A608set) Mom's is a basic machine, one speed, 3 cycles, 3 temps and infinite water levels. Hard to believe those machines are 10 years old this year, but they are! I don't know that the quality is the same as on the old machine, but mom's never had any problems with the washer or dryer!
Good luck with your new machine!
Jeff....
Thank you! It is my very first TL Maytag. I have never had or used one.
Should be exciting when I do the maiden wash tonite.
Thank you! It is my very first TL Maytag. I have never had or used one.
Should be exciting when I do the maiden wash tonite.
hoover1060
Well-known member
- Joined
- Apr 9, 2005
- Messages
- 3,309
I hope Gary
That machine sounds like a REAL Maytag....
Its a sound thats absolutely musical!
That machine sounds like a REAL Maytag....
Its a sound thats absolutely musical!
The Big Day has arrived
L@@K~!
L@@K~!
Arrived safely
Resting.....
Resting.....
Waiting to do....
It's maiden Load....
It's maiden Load....
Left side
Control panel
Control panel
Right Side
My only wish is that there was still an option for slow wash and a Fast spin......
My only wish is that there was still an option for slow wash and a Fast spin......
maytagbear
Well-known member
Wow!
She's a beauty, Gary. Thanks for posting.
As for the slow wash/fast spin, you can do what I did with my A208, which is hang around, turn off the machine, and change the speed settings manually.
(As if most of us would object strongly to hanging around the random cycle!)
Lawrence/Maytagbear
She's a beauty, Gary. Thanks for posting.
As for the slow wash/fast spin, you can do what I did with my A208, which is hang around, turn off the machine, and change the speed settings manually.
(As if most of us would object strongly to hanging around the random cycle!)
Lawrence/Maytagbear
Lid
Instructions
Instructions
Similar threads
Latest posts
-
-
-
45 miles east of nashville is a free brand new powerclean!
- Latest: gelaundry4ever
-
-
Sponsored
