Mom's Maytag D806 Washing Machine

[charles99]

Back in 1971ish, mom and dad wisely purchased the Maytag D806 washer and dryer. They've both been working very well, but lately she's had some issues with the washer. Where can I find the replacement belts, and how can I replace them?

Is there a service manual available?

Thanks!

 

[maytag85]

It’s A806 for the washer, DE/DG806 for the dryer.

 

[bpetersxx]

service manual is in the ephemera

Belts can be found online at parts appliances

Be sure you get original belts as other kinds will not work correctly

some of the members will chime in as well

 

[DADoES]

 
Belt replacement is simple enough that no service manual is needed.

Remove the front panel (two screws toward the bottom) so the belt guard isn't in the way.  Tip the machine back for access beneath.  Slip the belts off the pulleys.  Roll the new belts on.  Replace the front panel.  Done .... unless belt tension adjustment is needed, which is a specific procedure.

12112425 is the part number.

Here's a source, there are many.  As stated above, don't substitute lawnmower belts or the like.  The transmission/spin drive belt functions as the spin clutch, has a special coating to insure it slips properly on the motor pulley while the basket gets up to speed.  Improper belt won't slip, causes excess load on the motor which leads to cutting-out on overheat.

12112425 - Maytag Washer Belt Set of 2 | Parts Dr

Part 12112425 Whirlpool Belt Set (2) for Maytag Washers, genuine Whirlpool OEM replacement part.

partsdr.com

 

[charles99]

Thanks

Thanks to you amazing folks, I'll have her machine going again in no time!

Does anyone know if there is a service manual out there?

 

[bpetersxx]

thank you Glenn

you managed to say what i was trying to spit out and cannot

 

[vacbear58]

Service Manual

At the top of the screen, under the main banner, is a link "Manuals And Literature"
which is supplied by the owner of this site. There are serach boxes to take you to the manual you need, there will be a modest charge to allow you to access and download it. Good luck!

 

[bpetersxx]

thank you vacbear58

same reason