decodriveboy
Member
Hey guys, here are some photos of my Frigidaire, post-water-level-modification. It's running beautifully and I couldn't be happier.
My Frigidaire Modification!
- Thread starter decodriveboy
- Start date
Help Support :
decodriveboy
Member
shot 2
decodriveboy
Member
Splash at last
decodriveboy
Member
final shot
decodriveboy
Member
One interesting thing I noticed was that the HE detergent gets pretty sudsy with the higher water level. Wonder if there is any real point to using it versus any other low-sudsing detergent if thats that case?
pumper
Well-known member
that was my observation as well. even with the same amount of soap, you get even more suds. i picked up a kenmore top loader today at a yard sale for $25. seems to work fine. there are a few chips in the porcelain tub. can i just use appliance touch-up paint for them or is there something better?
Well, you also have nearly nothing in the machine. See how sudsy it gets with a full load, especially through the rinses.
How much of a "turn of the screw" did you do to get the water to this level?
How much of a "turn of the screw" did you do to get the water to this level?
decodriveboy
Member
Peter
I tried washing a comforter and it was still very sudsy. I am using Tide HE Liquid.
I gave about 8 or 9 turns of the screw and imagine it could go higher, but this is enough. I don't want too much pressure on the door latch. If there are a lot of suds, some will come out the bottom.
I tried washing a comforter and it was still very sudsy. I am using Tide HE Liquid.
I gave about 8 or 9 turns of the screw and imagine it could go higher, but this is enough. I don't want too much pressure on the door latch. If there are a lot of suds, some will come out the bottom.
pumper
Well-known member
I turned mine only 3 times and it's the same level as yours. That must be it's limit.
That's a little bit higehr than what I allowed Steve 1-18 to set my water level at. And with a larger and dirtier load, the suds become almost a non-isue. But I"m using Sears HE detergent and am very pleased.
Very nice Deco, front load washing the way it was meant to be!
lombardian
Member
- Joined
- Dec 20, 2006
- Messages
- 7
Does anyone know if the water level can be modified on a kitchenaid ensemble? Its two years old.
decodriveboy
Member
If it has a simple pressure switch you should be able to.
Where that switch is located....anyone know?
Where that switch is located....anyone know?
partscounterman
Member
lombardian
Your Kitchenaid is just like my HE3t-Take a look at the first picture in my thread about the HE3t teardown. If you look at the first picture, the pressure switch is just under the main top, to the right hand side.
This pressure switch looks MUCH more complicated than the ones I've seen on Frigidaire so I am hesitant to mess with it myself. Good Luck!
David
Your Kitchenaid is just like my HE3t-Take a look at the first picture in my thread about the HE3t teardown. If you look at the first picture, the pressure switch is just under the main top, to the right hand side.
This pressure switch looks MUCH more complicated than the ones I've seen on Frigidaire so I am hesitant to mess with it myself. Good Luck!
David
Tide HE in all it's forms is very sudsy. In fact using the full suggested dosage is almost certianly to send your machine into suds lock heaven. Did so once and it took many, many, many, many, many, many cycles running the machine empty to get the damn suds out. Gave up on rinsing the laundry in the machine, and dumped the lot into the bath tub.
L.
L.
OK, now my interest is piqued! Can I do a water level modification on my '02 Frigidaire GLTF1670A?
4 out of 5 dentists surveyed seem to agree that I'm somewhat mechanically inept, but if it's simple enough, I could probably manage this....
How How How???
4 out of 5 dentists surveyed seem to agree that I'm somewhat mechanically inept, but if it's simple enough, I could probably manage this....
How How How???
decodriveboy
Member
I don't know exactly what model that one is, but on my Frig, the pressure switch (which controls water level) is a round object on the ride side of the machine under the top lid.
I unplugged the machine first, removed the top lid which is held in place by two screws in the back, and I was able to get inside. The pressure switch is right there, easily recognizable.
I then took a Phillips screwdriver and turned the screw which is in the middle of that round object (the pressure switch) several times clockwise.
I unplugged the machine first, removed the top lid which is held in place by two screws in the back, and I was able to get inside. The pressure switch is right there, easily recognizable.
I then took a Phillips screwdriver and turned the screw which is in the middle of that round object (the pressure switch) several times clockwise.
decodriveboy
Member
Launderess
What is your pick for the best low-sudsing formula?
What is your pick for the best low-sudsing formula?
Persil
P&G Pro-Line Tide "Stain Removal Treatment"*
Vintage Wisk "Power Scoop" ultra powder (unscented)
* Nabbed a case of Tide SRT, which is marketed by Proctor and Gamble under their "Pro-Line" line for use in commercial laundries such as those found in hotels and cruise ships. The powder is sold as an in wash stain removal treatment for use in "reclaiming" badly stained linens that did not come clean in the inital wash, and or use as a pre-wash/soak.
What struck me as odd is the MSDS from P&G's own website says the product is "Tide w Bleach" or "Tide". Tide Proline's website says the product is very concentrated and low sudsing, and can be used in HE machines. Though laundry with high detergent residue and or using too much product can cause excess foaming (sound familar). Customer serivce swore up and down to me on the phone that the product is NOT regular Tide and shouldn't be used as a laundry detergent.
Being as the above may have been using 1-2 tablespoons along with some Ecover oxygen bleach and getting outstanding results. Very little to no sudsing in the wash, and VERY clean rinsing. In fact water is usually clear by the third rinse on my Miele. Like all Tide products, there is scent but IMHO not the same as Tide HE, and on the whole rather nice.
L.
P&G Pro-Line Tide "Stain Removal Treatment"*
Vintage Wisk "Power Scoop" ultra powder (unscented)
* Nabbed a case of Tide SRT, which is marketed by Proctor and Gamble under their "Pro-Line" line for use in commercial laundries such as those found in hotels and cruise ships. The powder is sold as an in wash stain removal treatment for use in "reclaiming" badly stained linens that did not come clean in the inital wash, and or use as a pre-wash/soak.
What struck me as odd is the MSDS from P&G's own website says the product is "Tide w Bleach" or "Tide". Tide Proline's website says the product is very concentrated and low sudsing, and can be used in HE machines. Though laundry with high detergent residue and or using too much product can cause excess foaming (sound familar). Customer serivce swore up and down to me on the phone that the product is NOT regular Tide and shouldn't be used as a laundry detergent.
Being as the above may have been using 1-2 tablespoons along with some Ecover oxygen bleach and getting outstanding results. Very little to no sudsing in the wash, and VERY clean rinsing. In fact water is usually clear by the third rinse on my Miele. Like all Tide products, there is scent but IMHO not the same as Tide HE, and on the whole rather nice.
L.
