My Unimatic is not Speaking.

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

toploader55

Well-known member
Joined
Oct 10, 2007
Messages
7,091
Location
Massachusetts Sand Bar, Cape Cod
Very Strange.

I put a load in the Unimatic last night. Filled up a third of the way and stopped filling.
It appears the whole machine is dead. I checked the circuit breaker and that's fine. If I advance the dial, Nothing. It worked fine a few days ago.

I did press the reset button, it just appears to have No Power.

Any Thoughts ?
 
OVERLOAD PROTECTOR

Did you actually check the overload protector by bypassing it ? they have a way of going dead, other than that its the cord ,timer, motor or other wring connection. The nice thing about these Unimatics was they were very simple electrically. Good Luck I am sure you will find the problem.
 
Dahling, just be careful viz zat electricycal... You don't vant to blue za fooze...

Seriously, it does sound like a bad or loose connection Eddie; check them all carefully and with the power disconnected!!
 
Back
Top