wendystevens
Member
Hoping one of you have a 3 solenoid valve for Maytag 142 laying around you would part with.
Need 3 solenoid valve for Maytag 142
- Thread starter wendystevens
- Start date
Help Support :
Three coil inlet valves for Maytag, etc.
Usually, the old one can be rebuilt pretty easily unless it’s in really bad shape, we just replace the three valve diaphragms and they normally work like new.
John
Usually, the old one can be rebuilt pretty easily unless it’s in really bad shape, we just replace the three valve diaphragms and they normally work like new.
John
sel8207
Well-known member
how to rebuild solenoid valve
Is there a post somewhere on how to rebuild a solenoid valve? Doesn't sound difficult,
but you never know.
Is there a post somewhere on how to rebuild a solenoid valve? Doesn't sound difficult,
but you never know.
It’s just a matter of taking one solenoid at a time off and the other two screws near the solenoid and replacing the rubber diaphragm, if there’s any mineral deposits on the brass part and the plunger inside, soak it in some CLR overnight, almost any repair manual for older automatic washers show how to do this almost all washing machines use the same style valve.
Other than that, it’s hard to answer your question. I don’t know your mechanical abilities.
John
Other than that, it’s hard to answer your question. I don’t know your mechanical abilities.
John
You'll need two of these kits, they come with new brass stems and rubber diaphragms...
https://amzn.to/4hbBDLE
https://amzn.to/4hbBDLE
As an Amazon Associate we earn from qualifying purchases.
