hotpoint95622
Well-known member
New camera, new videos of the Hotpoint 95622
I finally got myself a new camera.
I have made some videos of the 95622.
I finally got myself a new camera.
I have made some videos of the 95622.
New camera, new videos of the Hotpoint 95622
- Thread starter hotpoint95622
- Start date
Help Support :
hotpoint95622
Well-known member
hotpoint95622
Well-known member
hotpoint95622
Well-known member
hotpoint95622
Well-known member
matchboxpaul
Well-known member
Fantastic videos Lee.
Really brought memories flooding back of my parents 95452. Different but the same.
Has been really useful watching your machine and comparing it to mine and robs 95620.
When we used the 620 we/i was surprised at the different programming it has, when compared to my parents 452.
The changes are evident around the way that they distribute. My parents 452 would distribute and spin, but decelleration would reduce speed to just below distribute speed before the machine would start on distribution again. i.e the machine never stopped tumbling.
Then we plug the 620 in and it does the decellerate to stop and then snatch distributes. Your 622 does the same, so it is really good to have the different programming confirmed.
Again, still cant get over your 622's condition! it really is in such good condition - i trust you are very proud of it.
You get the bearings repaired, cause it sounds in fine fettle to me?
Paul
Really brought memories flooding back of my parents 95452. Different but the same.
Has been really useful watching your machine and comparing it to mine and robs 95620.
When we used the 620 we/i was surprised at the different programming it has, when compared to my parents 452.
The changes are evident around the way that they distribute. My parents 452 would distribute and spin, but decelleration would reduce speed to just below distribute speed before the machine would start on distribution again. i.e the machine never stopped tumbling.
Then we plug the 620 in and it does the decellerate to stop and then snatch distributes. Your 622 does the same, so it is really good to have the different programming confirmed.
Again, still cant get over your 622's condition! it really is in such good condition - i trust you are very proud of it.
You get the bearings repaired, cause it sounds in fine fettle to me?
Paul
matchboxpaul
Well-known member
and page 11...
hotpoint95622
Well-known member
hotpoint 95622
Hi, Paul
No I haven’t done the bearings yet, you can’t hear it on the videos but I know there on there way out, that slight rumble and occasional screech.
It is my second fevered machine, 18680 is top dog.
Hi, Paul
No I haven’t done the bearings yet, you can’t hear it on the videos but I know there on there way out, that slight rumble and occasional screech.
It is my second fevered machine, 18680 is top dog.
spiceman1957
Well-known member
- Joined
- Nov 9, 2006
- Messages
- 724
I gave my partner
this exact camera for Christmas. He loves this camera because he can hold it so comfortable in his hands and eliminates shaking. Takes really great pictures and videos.
John
this exact camera for Christmas. He loves this camera because he can hold it so comfortable in his hands and eliminates shaking. Takes really great pictures and videos.
John
hotpoint95622
Well-known member
hotpoint 95622
Cam, is a samsung flashCAM.
I went into comet and found it was the only one out of about 20 that would focus in on close up images. And it was on a deal, £109 instead of £140.
Cam, is a samsung flashCAM.
I went into comet and found it was the only one out of about 20 that would focus in on close up images. And it was on a deal, £109 instead of £140.
Spin distribution...
My Parents 95450, which i think would be the white version of Pauls parents 95452, also only slowed down from spin to around distribution speed before continuing to re-distribute.
Im assuming the stopping & starting of the 95622 would achieve slightly better spin results, as it should allow the items in the drum to change position slightly?
I always thought the clothes came out of our 95450 pretty wet feeling in places. Obviously it was only 800rpm so i can't expect miracles, but i wonder if it wouldve performed better had the distribution been like the 95622. Im guessing so.
Liam.
My Parents 95450, which i think would be the white version of Pauls parents 95452, also only slowed down from spin to around distribution speed before continuing to re-distribute.
Im assuming the stopping & starting of the 95622 would achieve slightly better spin results, as it should allow the items in the drum to change position slightly?
I always thought the clothes came out of our 95450 pretty wet feeling in places. Obviously it was only 800rpm so i can't expect miracles, but i wonder if it wouldve performed better had the distribution been like the 95622. Im guessing so.
Liam.
hotpoint95622
Well-known member
hotpoint 95622
It seems to depend on the load, towels or a large amount seems to produce the snatching you see in the video, light stuff like a load of shirts the drum seems to cost long enough into the redistribute. To be honest that doesn’t happen often thou.
It seems to depend on the load, towels or a large amount seems to produce the snatching you see in the video, light stuff like a load of shirts the drum seems to cost long enough into the redistribute. To be honest that doesn’t happen often thou.
dubstar85
New member
We had a Hotpoint 9934 washer dryer that done a very similar spin cycle. instead of stopping and going straight back into distribution it would do a tumble then go straight into it. It done the snatching thing too! Brings back some memories!
in the final spin after the second burst it would have a long tumbling period before doing a long 500rpm spin then speed up to 1000rpm. Was always gutted that everyone elses hotpoint would always slow down to distribute then fire straight up to 1000!
One other thing, our family friend had the 800rpm washer dryer and it span like the corresponding washing machine. Strange!
David
in the final spin after the second burst it would have a long tumbling period before doing a long 500rpm spin then speed up to 1000rpm. Was always gutted that everyone elses hotpoint would always slow down to distribute then fire straight up to 1000!
One other thing, our family friend had the 800rpm washer dryer and it span like the corresponding washing machine. Strange!
David
Similar threads
