steved
Well-known member
more
detail
detail
POD 9/10/11: Frigidaire Commercial Laundry
- Thread starter daveamkrayoguy
- Start date
Help Support :
steved
Well-known member
tub view
solid tub pulsator in perforated tub! I suppose the capacity is less because the pulsator is shorter
solid tub pulsator in perforated tub! I suppose the capacity is less because the pulsator is shorter
philr
Well-known member
The cycle selector looks like the one on my GMini!
Thank You, Guys!!!!!!
--For all the information on FRIGIDAIRE COIN LAUNDRY/COMMERCIAL LAUNDRY EQUIPMENT & then some...!!!!!!
-- Dave
--For all the information on FRIGIDAIRE COIN LAUNDRY/COMMERCIAL LAUNDRY EQUIPMENT & then some...!!!!!!
-- Dave
Frigidaire coin laundry
When I was a kid in the 60's my grandmother had a house at the Jersey shore (Lavalette). There were several of these Frigidaire coin laundries up and down the main boulevard (Rt.35). The machines were always turquoise, had the round window and a very fast spin speed. I was fascinated by the Frigidaires because I never saw a "pulsating" agitator before. It was very cool. Of course I always wanted to go when she went and my dad would get very upset that I didn't want to stay back and play with the other kids. Check out the pic in Phil R's link above, looked very similar. What model machines were they at that time?
When I was a kid in the 60's my grandmother had a house at the Jersey shore (Lavalette). There were several of these Frigidaire coin laundries up and down the main boulevard (Rt.35). The machines were always turquoise, had the round window and a very fast spin speed. I was fascinated by the Frigidaires because I never saw a "pulsating" agitator before. It was very cool. Of course I always wanted to go when she went and my dad would get very upset that I didn't want to stay back and play with the other kids. Check out the pic in Phil R's link above, looked very similar. What model machines were they at that time?
Now that we see the tub
shot, I had heard about this machine from someone wayyy back but never thought it actually was produced! A jet action 1-18 now that would be fun to play with!
shot, I had heard about this machine from someone wayyy back but never thought it actually was produced! A jet action 1-18 now that would be fun to play with!
peterh770
Well-known member
The problem is that you have to be careful with the water level. I put a Jet Action into my 1-18, and it wasn't too good. If the level is too high, stuff will get stuck on top of the cone and just loop around there in kind of a reverse turnover. The rest of the load just sunk to the bottom and didn't move around much.
Interesting experiment Peter
but if you set the fill to the 12 pound level it should work--in theory.
but if you set the fill to the 12 pound level it should work--in theory.
steved
Well-known member
I think so Jon
Since the specs say there is a preset fill level, with the pressure switch to prevent overfilling
Since the specs say there is a preset fill level, with the pressure switch to prevent overfilling
Similar threads
