Aww you guys are AWESOME!!!! I will keep in touch!! I asked a friend to come over today and do some laundry hahaha I will adjust as everyone has suggested and test today. I will also remove the front of the dryer and clean it (after unplugging lol). I will also watch the amount I put in. I agree I rather do more loads than put too much in one. Thank you sooooo much everyone!!
Proud new owner!! Needs guidance :)
- Thread starter rachel
- Start date
Help Support :
will also remove the front of the dryer
I would remove the front panel on the washer as well. Its just two screws on the toe kick and the panel lifts out and up, like a car hood, to release the top clips. Installation is the reverse. Remember to unplug the power cord first.
Check for evidence of water leaks, look for gray dust or a damper pad working loose. Another way to test the damper pads is grab the top of the agitator and move it around, it should move freely yet with some resistance.
There is video on youtube that explains it well.
If you're feeling brave, the top cover opens easily as well, two screws at the top corners and open again like a car hood and it is hinged at the back.
I would remove the front panel on the washer as well. Its just two screws on the toe kick and the panel lifts out and up, like a car hood, to release the top clips. Installation is the reverse. Remember to unplug the power cord first.
Check for evidence of water leaks, look for gray dust or a damper pad working loose. Another way to test the damper pads is grab the top of the agitator and move it around, it should move freely yet with some resistance.
There is video on youtube that explains it well.
If you're feeling brave, the top cover opens easily as well, two screws at the top corners and open again like a car hood and it is hinged at the back.
dustin92
Well-known member
If you don't have a level, or don't want to buy one, but have a smartphone; there are several FREE level apps- that should be plenty accurate for leveling a washer; maybe not building a house, but good enough!
Ok we have made progress!!! I did get the level on my phone but it didn't help much lol it said all was already level. I did adjust the front feet and it now has only a small quiet shake. TONS better!!!! It doesn't sound like it is a jet taking off hahaha it seems normal now anyway. So happy!! Thank y'all again!! Still have to take it apart. I cleaned the inside of the vent area again really well. I am a little nervous to unscrew anything but I can do this!! Lol
Piece o' cake. On the dryer, take the 2 screws out at the bottom, pull the bottom of the panel towards you, and unhook it at the top. Just be aware of the wires to the door switch. The washer is the same, but no wires to worry about.
danemodsandy
Well-known member
Removing the Front Panels:
It's easy to do, but Maytag hid the screws in plain sight. A photo is below, showing the location of the screws.
Once you have the screws out, grasp the panel by the sides, near the bottom. Pull on it, swinging it toward you. It will release itself from the two clips that hold it at the top when you have swung it far enough.
To reinstall, seat the top edge of the panel back on the clips, swing the panel down into place, and put the screws back in.
Piece 'o cake.
It's easy to do, but Maytag hid the screws in plain sight. A photo is below, showing the location of the screws.
Once you have the screws out, grasp the panel by the sides, near the bottom. Pull on it, swinging it toward you. It will release itself from the two clips that hold it at the top when you have swung it far enough.
To reinstall, seat the top edge of the panel back on the clips, swing the panel down into place, and put the screws back in.
Piece 'o cake.
hippiedoll
Well-known member
pictures..
rachel,
here is a load of towels that i am doing in my standard capacity A208 washer.
there are:
6 bath towels, 3 hand towels, 5 wash cloths.
picture #1
(towels are dry a poofy, not pushed down into the washtub & washer is starting to fill with water)
rachel,
here is a load of towels that i am doing in my standard capacity A208 washer.
there are:
6 bath towels, 3 hand towels, 5 wash cloths.
picture #1
(towels are dry a poofy, not pushed down into the washtub & washer is starting to fill with water)
hippiedoll
Well-known member
pictures..
here is picture #2 at a different angle.
(so you can get an idea of how full the washer is with the dry towels)
here is picture #2 at a different angle.
(so you can get an idea of how full the washer is with the dry towels)
hippiedoll
Well-known member
pictures..
and picture #3 showing the washer filled with water and agitating the towels load.
(notice how there is enough water for the towels to move around. and how they are not all crammed together in the water.
and picture #3 showing the washer filled with water and agitating the towels load.
(notice how there is enough water for the towels to move around. and how they are not all crammed together in the water.
hippiedoll
Well-known member
load of towels in the maytag...
i load the towels loosely around the agitator. i don't push the load down into the washer to try to fit more towels in there. this is the way i load the towels into my maytag washer.
just in case you want to know exactly how i do it.
;o)
i load the towels loosely around the agitator. i don't push the load down into the washer to try to fit more towels in there. this is the way i load the towels into my maytag washer.
just in case you want to know exactly how i do it.
;o)
These Maytags are
truly impressive finds, Rachel
These old Maytags were nearly built as solid as WWII tanks, much better I suppose many people will agree than the present-day Maytags by Whirlpool. Although no bad machines in their own way (far from it) the newer ones are simply no match to the longevity and built quality of the vintage, like yours. And you got that set at a low price, too!
One can easily understand your enthusiasm! Many nice wash days in perspective...
Take care!
Jean
btw, hello ''hippiedoll'' !!!
truly impressive finds, Rachel
These old Maytags were nearly built as solid as WWII tanks, much better I suppose many people will agree than the present-day Maytags by Whirlpool. Although no bad machines in their own way (far from it) the newer ones are simply no match to the longevity and built quality of the vintage, like yours. And you got that set at a low price, too!
One can easily understand your enthusiasm! Many nice wash days in perspective...
Take care!
Jean
btw, hello ''hippiedoll'' !!!
ovrphil
Well-known member
Excellent find and price
Congratulations Rachel, good score. Our Maytags are newer, but only slightly - 1984. They look in great condition, as ours. Enjoy them and this group - plenty to explore.
Phil
Congratulations Rachel, good score. Our Maytags are newer, but only slightly - 1984. They look in great condition, as ours. Enjoy them and this group - plenty to explore.
Phil
Similar threads
