Removing front plate from dispenser drawer on Miele washer?

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

jhanson

Member
Joined
Aug 23, 2020
Messages
6
Location
Denmark
I'm trying to remove the small front plate attached to the soap dispenser drawer on a Miele W5801 washer with slanted fascia panel. At first it seemed to be an easy job, but I simply cannot figure out how to remove it without high risk of breaking something.

Attached is an image I found of an identical drawer with the front plate already removed. It seems like I should just pull straight up, but no luck with that so far.

Any ideas?

jhanson-2021022000074403285_1.jpg
 
JHanson

You need to remove the plastic card in the front (that's the one with the Miele model numbers written on)use a thin flat headed screwdriver in between the card and the drawer and press it downwards, it should then pop out and the screw should be visible

miele_user-2021022009364601044_1.jpg

miele_user-2021022009364601044_2.jpg
 
Miele_User,

Thank you very much, that helped me remove the front plate.

I found out that inserting a toothpick in the space between drawer and plastic card, that became visible after pressing down with the screw driver in one side, made it a little easier to remove the card as it would prevent it snapping back when pressing down in the other side.
 

Latest posts

Back
Top