SCORE! Finally found a used PW6065

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

uncledave

Well-known member
Joined
Feb 4, 2012
Messages
83
Location
California
The guy knew what he had but needed to let it go. He nearly cried when I drove away with it.

This will join my W1215 as a redundant/ backup unit.

Its at my shop now being tested in various modes.

Machine is really about the same size as my 1215 I think it may be a tiny bit larger Miele claim something like 5.5 vs 5 KG Ive seen for the 1215

to be honest I've seen various measurements on both.

Ive also seen 2 quotes on the theoretical bearing life 15K and 25K. Either will be stout enough for my purposes, but more is always nicer to hear.

This units top spin speed is 200 RPM slower 1400 vs. the blazing 1600 the 1215 belts out.

I wanted to try a new speed queen FL, but its inability to maintain 140 for 10-15 min takes it out of contention for my grooming/ animal needs and I need redundancy.

Im almost a full "Mielehaus"

Miele Marin Vac
2x Miele 373-B's ovens
Miele G851 SC dishwasher
Miele W1215 washer
Miele T1405 dryer
Miele PW6065 washer

Miele lost the mangle to Singer - better machine in our practice we tried them both.
Miele lost the cooktop to Thermador- didnt like the Miele grates (parents had one)
Miele lost the vent to Vent a Hood.

They didn't have a counter depth french door fridge - so the business went to Samsung but I would have bought a Leibherr / Miele if I could find one.

Uncle Dave

uncledave-2017053021391109710_1.jpg
 
You mean a 2x plug one each for the washer and dryer right?

the was he ron has one.

Correct most American homes only have one 220 receptacle for the dryer and have to pull in another 220 line.
 
Pw6065 Stainless!

Hi

Very nice, I have one of these too in my collection of vintage and commercial machines. Much prefer my Electrolux and Schulthess commercial machines but its still a nice machine. Yours appears to be in better condition than mine, mines missing its plinth and the text has almost completley faded.

PM me if you need any manuals for it as I have them on my laptop.

Chris

servischris++6-3-2017-12-55-2.jpg
 
So Happy for You!

This is my next dream machine, new or used, but I have never seen one offered used. I thought that that there was some restriction on importing them to the USA.  I have lots of 240 volt outlets in my basement.

 

Do they make a pedestal for it?
 
I've had one for a year this month

The PW6065 had been my dream washing machine too. I was lucky enough to be able to purchase one. After a year I'm still discovering different options. This little 6KG capacity machine seems small in capacity but I've been able to wash everything, including my king size down comforters. With the 5000 watt heater, we're guaranteed selected temps (confirmed with infra-red therm). I had an electrician come in and put the correct plugs in for the washer and dryer.
My favourite part is the control we have with these machines- wash temp (mine is set to Celsius, for control in 5 degree increments), rinse temp, prewash length and temp, different water level settings, number of rinses, and among others, the ability set a cold or hot fill.
I'm a caregiver and a massage therapist, so I have a few laundry challenges, this machine gets everything clean first time and quickly. Most cycles are less than an hour.
If you have any questions I'm happy to answer. I'm still amazed at what this machine does.

aamassther-2017060314515004023_1.jpg

aamassther-2017060314515004023_2.jpg

aamassther-2017060314515004023_3.jpg

aamassther-2017060314515004023_4.jpg
 
@tomturbmatic

Yes, they make 2 heights of plinths. They're on the Miele pro site. These are the only pro models that Miele allows for residential use. As far as dryers, they will only allow us to purchase the PT715C condenser dryer, even though they still import the vented for commercial use.
 
Thanks Chris!

Ill send you a private mail to send that PDF to.

The love of Schulthess I get, never seen a commercial electrolux machine and am not too impressed with their home lineup.

Curious about what you like about it, and where I could go to take a look?

Im looking for a 40-ish pound class commercial machine at the moment to do boat covers in at the shop.

Uncle Dave
 
Back
Top