Speed Queen solid tub tune-up

[akronman]

boot again

this diagram shows the boot and clamps, top of the pic. It does NOT show where it fits in the machine.

My machine is a DA3780, Sears Parts let me download around 23 pages of diagrams for my machine. Do you know your model #?

 

[yogitunes]

Mark....your machine spins clockwise, did you get the exact pump for your machine?....

it gets a little tricky because a solid tub with the banging solenoids spins counter-clockwise....and the picture you have up there from ebay is for this type of machine.....

no big deal during wash, they both will pump, but during spin, you want the full force of it spinning in the right direction for the port...

just make sure you match up any purchase with the one already installed..

 

[akronman]

Martin

My pump was installed by the previous owner and works perfectly. I was just Ebaying "Speed Queen Pump" to show Rollermatic that pumps are still available. Thanks for letting us know there are differences--

 

[rollermatic]

thanks for the info akronman

both on the pump on e bay and the parts store in akron. I did pull up 2 previous threads done by you and me, #41424 and #49864. enjoyed your's and also re-looking at mine.

can't find the model # for my machine handy but do remember i was told here that my machine was a later model solid tub from the 70's. once weather warms up I will pull machine out, remove front and look for it, too cold here in cinti right now, my laundry room is basically unheated. not freezing but cold!

yogitunes, thanks for info on pump direction. from looking at new pump on e bay and pics on mine from my thread 41424 it does look like mine pumps in an opposite direction from the one on e bay.