cfz2882
Well-known member
just got a franklin built MW washer from 1989;it's the '70s/80s
style with the smaller tub and the pump under the motor.
Got for $50,it actually works perfect with no problems at all
-ran it with a fairly small load and seen that the tub indexes
about 90* in one direction while agitating,when tub is held
from indexing the rollover improves noticably...
On the final spin,it spins out the water,stops shoots in about
a gallon of water,then resumes the spin.
The drain pump is quite noisy when it sucks air and there is
some transmission gear noise when agitating.
style with the smaller tub and the pump under the motor.
Got for $50,it actually works perfect with no problems at all
-ran it with a fairly small load and seen that the tub indexes
about 90* in one direction while agitating,when tub is held
from indexing the rollover improves noticably...
On the final spin,it spins out the water,stops shoots in about
a gallon of water,then resumes the spin.
The drain pump is quite noisy when it sucks air and there is
some transmission gear noise when agitating.
