In a vented dryer, a load of towels out of a Belt Drive Whirlpool takes about 90 to 100 minutes with a 10 minute cooldown on hot.
From the Miele with an 1800RPM spin the same load takes about an hour.
In the Air condensor Miele, it takes about 2 hours when coming from the FL machine. I tried drying one load out of a GE FF and I had to empty the condensate container mid cycle as there was so much water to remove, and it took almost 3 hours.
(Load consists of 4 towels, 2 bathmats, 2 facewashers, 2 handtowels and 6 Teatowels.) This isnt a full load in the 5.5kg Miele FL machine.
From the Miele with an 1800RPM spin the same load takes about an hour.
In the Air condensor Miele, it takes about 2 hours when coming from the FL machine. I tried drying one load out of a GE FF and I had to empty the condensate container mid cycle as there was so much water to remove, and it took almost 3 hours.
(Load consists of 4 towels, 2 bathmats, 2 facewashers, 2 handtowels and 6 Teatowels.) This isnt a full load in the 5.5kg Miele FL machine.