unknow twin tub ?

[buzywoman]

tank-you : Twin Tubber and cfz2882

the motor of pump is tired, not turn and burn odor the engine is too used have weld spot on the motor.

y have cleaned and cleaned and bad.

if find a new motor with 3 bolt hole 55mm center of hole , good idea for reinstall hose case on new motor.

 

[unclejohn]

Missing back panel

Hey buzywoman,

just a few words, concerning the back panel, if you're living in -- or nearby -- the region of Qc city you could try having a new panel ''fabricated'' for your washer. I've contacted a place where, actually, they can create a new cover at your specifications. In my case it was easier perhaps because I had another cover of exactly the same size and design to leave there as a model for exact replica. They offer a choice of either metal or aluminium foil as basic materiau. I chose the thin aluminium because it comes in white color on one side and it is a bit less expensive. Of course, you do not seem to have another panel at hand so the very exact numbers would be needed on paper (precise measures and exact location of screw holes, for example)

Meanwhile, quick calls to a few other companies confirmed that some may charge way more for the manufacturing-processing of a cover (up to hundreds of dollars!).

Mine's manufactured cover costs total $75. I am anxiously waiting to see the end result! It should be ready by the next week -- somewhere around November 15. So, if you're living in the vincinity and think the investment is worthwhile you could try contacting them, they are expert in the field of metalwork production. Even without a model, they probably could pull something interesting off their hat as a replacement for your washer. Why not just ask them what they think about it?

(...please note thas I wasn't paid to advertise this company in any manner...)

Anyway, here's the link to their website:

Métal Léger L&V distribution chauffage ventilation climatisation Québec

Les produits transformés et distribués par Métal Léger L&V sont destinés aux applications résidentielles, commerciales, industrielles et institutionnelles

metallegerlv.com

 

[buzywoman]

hello unclejohn, tank-you for your reply, for the back pannel cover, trying create a new cover by the adult school on metal and solder.

before cover pannel trying find aand fit a new drain pump and find picture of water hose system, y have a water inlet hose i don't know fitted on the spinner tub , i dont' know if a missing part,, the hose connected directly on the spinner tub.

I am from Drummondville, Qc and my first is french.