Washing machine door seals

[ozzie908]

I have a few bin bags of different door seals for UK front loaders IE Hoover hotpoint indesit and candy to name a few if of any use to you please get in touch all I ask for is the cost of posting

Austin

 

[ozzie908]

Also have

A few older Bendix ones and some Hoover and Hotpoint Washer/Dryer too.

Austin

 

[servisslimline]

doorseals

got any for a servis 308S?

 

[servisslimline]

doorseals

my papa wondered if youve got 2 servis doorseals for a 308S that'd be great,also if youve got one to fit a bendix 7128 itd be great, and a hotpoint 9534 seal that way ill have a spare for all 3
phil

 

[ozzie908]

Servis Door seal

I will have a look for you as soon as I can

 

[ozzie908]

Unable to find your 308s seal

I know some Servis door seals were the same as Hoover back in the late 70's through to the 80's sadly the stickers have come off the ones that resemble Hoover/Servis so if you want to take your seal off lay it flat and measure the distance across the middle of the inside that seals around the tub and the front that seals the door if you can send me a picture of the seal you need and I will try again for you am sure there is one that may fit

Austin

 

[hotpointfan]

Austin

You wouldn't by any chance have one for a Performa range, my Hoover SE220 is the same as the Performas! Thanks, Jacob.

 

[ozzie908]

Jacob

I am pretty sure I did spot one but it may have been a washer dryer one I will check for you and let you know.

Austin

 

[aquarius8000]

Hotpoint Door seal

Hi Austin. Do you have a Hotpoint washing machine door seal to fit a WT960G? As it has a manky seal and it leaks witch is not great.

Cheers, Chris

 

[ozzie908]

Chris

I will check for you and get back to you asap

Austin

 

[aquarius8000]

Austin

Cheers for that. If you have 2 then I would not say no as the machine indoors (WT960P) has a manky seal too.

Chris

 

[ozzie908]

Sorry Guys

Both your machines are too young to match the seals I have got !

 

[ozzie908]

Jacob

I have just seen your performa pic can you take one of the door open? there is a possibility I may have a boot to fit I am not sure though.

Austin

 

[hotpointfan]

Austin

Here you are...

 

[ozzie908]

Nice one !

I will have another look in the meantime if you run a maintenance cycle with a bottle of THIN bleach from lidl for about £1 when the machine has stopped filling put the container of bleach in through the soap drawer and let it run a 90 wash that will kill off any more bacteria and fade what is leaving its mould behind. you should then be ok to use the machine as I am assuming its not leaking ?

Austin

 

[hotpointfan]

Austin

Not plumbed in yet but is and was on the top of my list of priorities! Thanks, Jacob.