upscale model t
I heard the GE model t washers were also available in the upscale segment.
I heard the GE model t washers were also available in the upscale segment.
When did Whirlpool start go to bad?
- Thread starter whirlpool862
- Start date
Help Support :
Reply #14
"The WCI Frigidaire machines were terrible and didn’t turn anything over, and they had reliability problems also. They also lacked tub brakes. The WCI Frigidaire washers just didn’t clean your clothes and didn’t last very long".
Those are some bold claims there you're making.Yes WCI is much maligned and rightfully so, BUT their agitators could turn over loads and clean them.
I'm thinking of the 5 vain straight vane used in WCI Frigidaire machines. The DAA could also turn loads over.
Everything else I would agree with. Cheaply built and they rusted out easily and most just didn't last.
"The WCI Frigidaire machines were terrible and didn’t turn anything over, and they had reliability problems also. They also lacked tub brakes. The WCI Frigidaire washers just didn’t clean your clothes and didn’t last very long".
Those are some bold claims there you're making.Yes WCI is much maligned and rightfully so, BUT their agitators could turn over loads and clean them.
I'm thinking of the 5 vain straight vane used in WCI Frigidaire machines. The DAA could also turn loads over.
Everything else I would agree with. Cheaply built and they rusted out easily and most just didn't last.
whirlpool862
Well-known member
The GE model Ts or WCI Frigidaire just didn’t clean as well as a Speed Queen, older Maytag, or a Whirlpool direct drive.
Both the WCI Frigidaire and Model T GE were bad machines, and when they failed they had to get scraped. Frigidaire also made a terrible high efficiency system with the agitub design. Looked like Frigidaire’s answer to the GE HydroWave (which was a terrible machine of it itself), but they used a motor used on a TR Speed Queen washer.
The tubs were plastic, but they used bottom suspension.
Both the WCI Frigidaire and Model T GE were bad machines, and when they failed they had to get scraped. Frigidaire also made a terrible high efficiency system with the agitub design. Looked like Frigidaire’s answer to the GE HydroWave (which was a terrible machine of it itself), but they used a motor used on a TR Speed Queen washer.
The tubs were plastic, but they used bottom suspension.
Are you referring to this?
I'm curious what the insides look like.
I'm curious what the insides look like.
whirlpool862
Well-known member
Yes. These were one of the last WCI Frigidaires and were horrible machines.
Just to say, Whirlpool quarterly earnings-per-share is reported being 2% higher than expected.
Well to me, a cheapening of could have happened during the time plastic handles replaced the metal ones, and the machines were no longer offered with independent speed selections or even separate wash and rinse temperatures...
-- Dave
-- Dave
Dave, WP offered speed selection independent of the timer cycles only on top-of-line Imperial Mark 12/18 models and a few Imperial non-Marks as I recall during the classic belt-drive era. Direct-drive models initially had speed programmed into the timer.
Yes Glen, that's true...
Maybe I'm just noticing how much older the ones are getting with the handles and control panels that I most like...
-- Dave
Maybe I'm just noticing how much older the ones are getting with the handles and control panels that I most like...
-- Dave
Whirlpool washers and dryers
Went to plastic handles on the lids and dryer doors in the 1970s
Went to plastic handles on the lids and dryer doors in the 1970s
This has been discussed over the years, but personally I think Whirlpool began to decline once they discontinued the belt drive washers. While the direct drives have proved themselves over the years, still don’t wash or rinse all that well compared to the belt drives which had a longer agitator stroke which flexes the fibers more along with spray rinses to help rinse things away a bit better.
cfz2882
Well-known member
as a kid,thought Whirlpool was on it's way down when they started "welded" plastic pump covers about 1978 instead of the earlier clip on ones...
About the same time,WP went with all Emerson motors vs GE/Emerson mix.
About the same time,WP went with all Emerson motors vs GE/Emerson mix.vacerator
Well-known member
Didn't Whirlpool improve the new direct drive washers with a new drive type after the older Cabrio full size models? Those had The F.P. type induction rotor/stator no? Do they still make the crappy VMW belt drive?
I would say 2011.
#31.
Don't know if I say I can agree with that. Been using direct drive washers for 37 years and I can compare them directly with the two belt drives I have.
It's funny isn't it? Frigidaire pulsator washers didn't really flex the clothes but just kept them spinning in the same spot continually and yet they were supposed to be some of the best cleaners.
I know one thing that the direct drive can handle unbalanced loads better then the 74 Kenmore Jumbo tub I have .
Don't know if I say I can agree with that. Been using direct drive washers for 37 years and I can compare them directly with the two belt drives I have.
It's funny isn't it? Frigidaire pulsator washers didn't really flex the clothes but just kept them spinning in the same spot continually and yet they were supposed to be some of the best cleaners.
I know one thing that the direct drive can handle unbalanced loads better then the 74 Kenmore Jumbo tub I have .
Whirlpool must've had the most advanced technology back then when the DD came out.
