Guys, as you can See, Kevin, Darryl and I have been quite busy lately.
All that because I took two weeks off Lyft and Uber and had plenty of time to spend on Craigslist and Facebook Marketplace.
We found the SQ Ultra-Mate, Kevin's new Miele pair, a Samtag Neptune gas dryer (to match the washer Kevin already has and is visiting my laundry room) and a White Westinghouse Spacemates washer (pictures later) that Kevin bought and is also here visiting. Am I forgetting something? Maybe yes, I'm not sure...
The SQ seems fine. I OCD cleaned it, the dryer drum rollers were just deformed and went back to the original shape, no replacement needed. The machine is fully operational and beautiful after I polished it (more pics and videos later, when Kevin has some time to come here and help me with the gas connection).
Now I'm starting with the White Westinghouse Spacemates washer.
The door boot is long damaged (not a surprise at all) and the previous owner was stupid enough to continue using it up to the very last day.
The washer is nasty. I removed the baffles yesterday and scrubbed the tub as well as I could. I also managed to clean the button catcher that was HORRIBLE with at least 3 decades of lint, gunk and more coins than my piggy bank. I won't even mention the 1 1/2 small bucket of gunk I could manually remove There was probably no more than 2mm gap between the drum and the tub and it's now draining much faster.
Anyway, I'm desperate for a door boot. Not only one, at least FIVE, because I know Kevin also has some Spacemates in his Washers Disneyland so it will be great to bring them all back to life. As I'm going to fix one, why not fix all of them at once and make Kevin happy after so much help he's giving me.
I Also need a drain pump, it I'm not asking too much.
Is there any hope?
I remember I saw not too long ago a member that did a fantastic job making Frigidaire pulsators, but I couldn't find the thread. Can anybody help me?
I'll also post later the serial number (I'll actually ask Darryl to post here because he's the one that loves taking notes of everything.) I'll post pictures later as well.
This will be a big project, as I'm planning to bring 4 or 5 Spacemates washers and 3 or 4 Spacemates dryers back to life and hopefully Kevin will end up with a Westinghouse wall next to the Miele wall.
I hope there's some room left at Washers Disneyland because I just found on Craigslist something else Kevin would die for.
All that because I took two weeks off Lyft and Uber and had plenty of time to spend on Craigslist and Facebook Marketplace.
We found the SQ Ultra-Mate, Kevin's new Miele pair, a Samtag Neptune gas dryer (to match the washer Kevin already has and is visiting my laundry room) and a White Westinghouse Spacemates washer (pictures later) that Kevin bought and is also here visiting. Am I forgetting something? Maybe yes, I'm not sure...
The SQ seems fine. I OCD cleaned it, the dryer drum rollers were just deformed and went back to the original shape, no replacement needed. The machine is fully operational and beautiful after I polished it (more pics and videos later, when Kevin has some time to come here and help me with the gas connection).
Now I'm starting with the White Westinghouse Spacemates washer.
The door boot is long damaged (not a surprise at all) and the previous owner was stupid enough to continue using it up to the very last day.
The washer is nasty. I removed the baffles yesterday and scrubbed the tub as well as I could. I also managed to clean the button catcher that was HORRIBLE with at least 3 decades of lint, gunk and more coins than my piggy bank. I won't even mention the 1 1/2 small bucket of gunk I could manually remove There was probably no more than 2mm gap between the drum and the tub and it's now draining much faster.
Anyway, I'm desperate for a door boot. Not only one, at least FIVE, because I know Kevin also has some Spacemates in his Washers Disneyland so it will be great to bring them all back to life. As I'm going to fix one, why not fix all of them at once and make Kevin happy after so much help he's giving me.
I Also need a drain pump, it I'm not asking too much.
Is there any hope?
I remember I saw not too long ago a member that did a fantastic job making Frigidaire pulsators, but I couldn't find the thread. Can anybody help me?
I'll also post later the serial number (I'll actually ask Darryl to post here because he's the one that loves taking notes of everything.) I'll post pictures later as well.
This will be a big project, as I'm planning to bring 4 or 5 Spacemates washers and 3 or 4 Spacemates dryers back to life and hopefully Kevin will end up with a Westinghouse wall next to the Miele wall.
I hope there's some room left at Washers Disneyland because I just found on Craigslist something else Kevin would die for.
