mayken4now
Well-known member
OMG, look at all the treasures, and some are not even shown.
Steve has some awesome machines.
Steve has some awesome machines.
*****Wonderful Friday Atlanta Gathering *****
- Thread starter mayken4now
- Start date
Help Support :
mayken4now
Well-known member
After pulling, beating, banging you still wont come out? Watch this.
mayken4now
Well-known member
OOPS.
mayken4now
Well-known member
Next.
mayken4now
Well-known member
We have a lot more pictures, however, this camera that we have does not let pictures of equal size be posted. Sorry Scott, we will send you yours on Don's email.
If any of you folks ever get the chance, and want to meet and enjoy a very wonderful person, visit Steve in Atlanta.
We all had such a great time.
If any of you folks ever get the chance, and want to meet and enjoy a very wonderful person, visit Steve in Atlanta.
We all had such a great time.
beautiful stove
Wow, looks like y'all had a blast
Steve I tried to email you as from your profile and got this error message .........
----- The following addresses had permanent fatal errors -----
<[email protected]>
Wow, looks like y'all had a blast
Steve I tried to email you as from your profile and got this error message .........
----- The following addresses had permanent fatal errors -----
<[email protected]>
westytoploader
Well-known member
- Joined
- Sep 4, 2004
- Messages
- 4,485
WOOHOO!!! Looks like y'all had a lot of fun, thanks for the pictures! Steve B, congrats on the Rapidry 1000 Rollermatic...you're on a roll here already with the Unimatic, 1-18, and finally this one!!! Now to find a Pulsamatic, Multimatic and Skinny-Mini! ;-)
Steve R, you have quite a collection; the Highlander sure looks splashy with those jeans!
And I see you now have an Agi-Tamer as well. It will come in SO handy when you least expect it; mine has saved me many times! I didn't like the messy water-hose setup on mine, so I cut off the connector and now it's air powered! Even with my little diaphragm compressor it will still lift me up off the ground and was able to get a horribly stuck Kenmore agitator out with no problems!
--Austin
Steve R, you have quite a collection; the Highlander sure looks splashy with those jeans!
And I see you now have an Agi-Tamer as well. It will come in SO handy when you least expect it; mine has saved me many times! I didn't like the messy water-hose setup on mine, so I cut off the connector and now it's air powered! Even with my little diaphragm compressor it will still lift me up off the ground and was able to get a horribly stuck Kenmore agitator out with no problems!
--Austin
Whatt do you mean its too big?
Hi guys!
Resizing the pics to 4x6 @100 pixels per inch works for me.
Should bring it down to below the threshold/bytes limit.
Thanks so much for posting!
Hi guys!
Resizing the pics to 4x6 @100 pixels per inch works for me.
Should bring it down to below the threshold/bytes limit.
Thanks so much for posting!
westytoploader
Well-known member
- Joined
- Sep 4, 2004
- Messages
- 4,485
Steve, didn't see your message before. The maximum picture size you can post in the Discuss-O-Mat or photo viewer is 1024 X 768, or 400000 bytes. Try reducing it to that and see if it works. Are you getting the "you are trying to upload a file exceeding 400000 bytes" page?
jasonl
New member
Get Irfanview. You can resize to a perfect 1024x768 OR set your camera to take the pic at that resolution. It will save ALOT of memory space doing it that way. Unless you're going to print it on a large format printer, 1024x768 is just fine. A normal television can't display that resolution and that will almost fill most monitors without resizing it anyway.
Wow you guys great pictures! I'm getting hungry just sitting here looking at all those wonderful food pictures. Thanks for sharing, looks like everyone had a great time.
Steve,
How many of the Highlanders in the garage did you tear up, OOPS, I mean fix?
How many of the Highlanders in the garage did you tear up, OOPS, I mean fix?
PeterH
We made one good Maytag 124 out of the two from Jessup. Did not complete the job but that will follow-----in time.
We made one good Maytag 124 out of the two from Jessup. Did not complete the job but that will follow-----in time.
harold
New member
Speed Queen
I love that Speed Queen washer! Boy, I love having a Speed Washer in my kitchen! Man, I do love having a plate of food also!
I love that Speed Queen washer! Boy, I love having a Speed Washer in my kitchen! Man, I do love having a plate of food also!
Wow - what a great time you guys had, the food looks wonderful and I know how Steve goes all-out feeding the hungry!
Wow, what a party!
It looks like y'all had fun and you know a washin is not complete unless a Maytag is running.
Thanks for sharing!
It looks like y'all had fun and you know a washin is not complete unless a Maytag is running.
Thanks for sharing!
Brent-Aucoin
Well-known member
- Joined
- Sep 4, 2004
- Messages
- 887
We had a great time! It was so great to fellowship with like minds!
Steve went all out, and it turned out great! I think I gained about 10 pounds just from sitting in the kitchen before eating!!! (and about 10 from eating) The food was Awesome!
The whole spirit was awesome!
It was so nice to spend quality time with everyone!
Thanks Steve for making this possible!
Brent
Steve went all out, and it turned out great! I think I gained about 10 pounds just from sitting in the kitchen before eating!!! (and about 10 from eating) The food was Awesome!
The whole spirit was awesome!
It was so nice to spend quality time with everyone!
Thanks Steve for making this possible!
Brent
It was great to see all of you guys! Sure looks like you had fun!! How did you ever have time to play with machines with all of that great looking food!! Steve that mac and cheese looks outstanding. Thanks for sharing your fun weekend with us. Terry
mayken4now
Well-known member
Yes Jason, yes, you should see that machine. The close ups are incredible.
Yes Austin, I am getting the message. I will try and resize the ones that would not post. I am not the sharpest knife in the drawer you know.
Peterh770, I beg your pardon, just two!!!!!!!!!!!!! That's all Steve would let me have to tear up. (Ducks & Runs)
gregm if it is I you wish to speak with, the address my dear is [email protected].
Yes Austin, I am getting the message. I will try and resize the ones that would not post. I am not the sharpest knife in the drawer you know.
Peterh770, I beg your pardon, just two!!!!!!!!!!!!! That's all Steve would let me have to tear up. (Ducks & Runs)
gregm if it is I you wish to speak with, the address my dear is [email protected].
