Zanussi Z9191T videos

[robm]

Hi Tom

Great videos, thank you for sharing.

As explained this has a unique motor. The two main differences I notice from this machine and my S218T are -

A, this only distributes one way
B, the spin takes longer to rev up (from distribution)

My machine can jump sometime because the rev up is so quick.

One other thing I notice about these Zanussi's is the lack of suds lock. You really have to have a lot in the drum to make any water run down the front. Presumably because the outer drum is bigger than some other makes.

This brought many memories back for me.

Rob

 

[aquarius1984]

Warnings

Our 'grey' Zanussi WD1012 has this warning too.

Ours has the drum tension thing going on too, didnt realise it just why though. Now I do lol,

I just love how nosiy it is at 500rpm for it to then really quieten down when it goes to 1000.

I can see this machine becoming our daily driver for a good while when we move in together.

Rob

 

[aquarius1984]

Label

 

[aquarius1984]

controls

 

[aquarius1984]

programmes - vast array

 

[newwave1]

Zanny sudslock!

My zanussi unlike Toms & Rob (m)'s has holes in the front of the drum aswell as the sides! I should think T'other robs grey panel zan will have the same drum as mine with it being a washer/dryer! Big bulky load combined with lots of water gives me a really cool suds and water billowing out of the seal down the glass on the first "blip!" spin as i can it. As it throws everything into a short spin before stopping tumbling both ways and redistributing for the 2nd longer spin, throws water down until it's cleared!

The distribution on toms is the same as mine brief quick distribution and whoosh! lol.

Darren

 

[aquarius1984]

Darren,

Im not 100% sure about the hole thing but il look at in on saturday and see whats what with the drum.

I dont remember their being any when we last had the machine out.

They have good strong pumps on them so that helps with a good decent spin without water flowing all about.

R

 

[matchboxpaul]

Seeing your Z9191T has made me want to get mine and robs wd1012 out to play again.
If only it didnt weigh an absolute ton.

Great vids of a wonderful washcraft Zanussi - wonderful machine, held in very high regard by appliance repairers.

Keep em coming.
Paul
p.s saw a Z929T at the weekend! one day, me and rob will own a washcraft too.