Search results

Great news I’ve got an idea of how I can convert it from steam heated to electric heated This means that I can use the original fittings instead of having to cut a hole in the machine, probably the easiest solution would be using the rod style immersion heaters like the one on the first image...

Oh, this machine does not have any set program, it’s literally just on and off and it only Tumble, fill and drain are completely manual as well as timing so I’m assuming shouldn’t it be better to let it sit and heat or tumble and heat? I’m almost thinking about having The set up start tumbling...

Hey guys, so my industrial machine is going to be coming in about a month and I want to convert it from it being steam heated to electrically heated as I’ve got no facilities to heat it using steam, what’s generally a good Watage for heating a large amount of water somewhat slowly? (I have up to...

Honestly, this is probably the most unique yet. Also basic control panel I’ve seen for any of the Washers I have The timer dial rotates once for an absolute full cycle, rotates three-quarter of the way for no-iron(permanent press) or “soft” “delicate”

Thank you for supplying the photos. I fell asleep right after posting the thread so I didn’t get a chance to do it myself.

Found this while scrolling through Facebook marketplace Located in Campbell CA Hopefully someone may be able to save it/hopefully it’s not too far goneLink to Facebook marketplace advert

Do y’all have any tips or anything to say? Sorry it’s just I enjoy the engagement.

A six minute long video of everything physically working in this machine, all I really did was anything that moved. I put a little bit of sewing machine oil, again, I didn’t put anything in the transmission though I probably should at least check to see if there is anything in the transmission...

Great news I’ve replaced the original wiring between the wall plug the switch and the motor and it’s all working, I just need to make sure that the motor is going the right direction and it’s changing direction where it needs to if it does. (not sure how it works) but I’ll try to put a belt on...

Great news guys, it’s all freed up with a bit of time and turning and I think I might have to replace the wiring between the switch and the motor but the shift selector is now working. The transmission is turning and the switch probably needs a bit of a clean out. Honestly I would never thought...

TOL means top of Line, BOL means bottom of Line referring to like if it’s the top of the range or a basic model that’s found in the bottom

And depending on who you ask, it looks really good or it looks like the worst machine someone’s ever seen

Hey guys, yesterday afternoon I had brought this beauty behemoth for 300 and it’ll mean that I’ll be able to have a machine that can probably do large blankets doonas (comforters) etc. Instead of running down to the laundromat. The machine is three phase but. It does have a half horsepower Motor...

Oooh so do you know if they fit and work?

Alright, I’ll try taking the Pump off when I get home today and consider considering this thing still has its water seal and tub bumper ring according to the parts manual so I’m kind of a bit unsure if I can just unbolt the tub and undo the tub to Pump hose Also, I’m a little curious. Does...

Hey guys, so I recently got my new Thor automagic home and the transmission seems a bit locked up so do you guys have an idea of what I can do to try and get it to free up? I do have two of them so I’ll have a better look at both of them on Wednesday as I’ll be heading out of town tomorrow. The...

So we didn’t stop, but I now have it home on the deck, and I’ll grab some more photos of the inside tomorrow morning, the motor spins freely but the transmission is locked up and the motor needs a new cord, it does come with a seal though and it is still flexible

I’ll grab more photos when I stop next and it has a metal agitator too!

Did this and it’s a LOT easier to move and it has two parts manuals

Okay let me know how it goes having a look if you have a spare, and I think maybe we should get the same person who did those 118 ring things for their machines to probably do a reproduction of that seal Generally, what are the things I should probably look out for? And Should I try to secure...