Search results

Some extra features This model has the rinse hold feature which you don't really see on many modern machines these days.

Rinses Hi it does standard 3 deep rinses with the option to do an extra one. In between rinses it flushes some fresh water through to clear any suds before it goes on to the next rinse which is a vast improvement on my previous beko which was awful at rinsing. Even at the end of the programme...

Hi In my opinion white knight dryers are pretty reliable. They are basic and just do a good job. My brother had his for eleven years with no problems and only changed it to another white knight as the dreaded rust started to kick in. I've had white knight and a few of my friends have without any...

Adam Yes the miele has been stripped and cleaned. I've had the pressure washer on the spider and it came back to black. You could actually smell the washing powder. Think Ariel. All the parts have had a good soak and wash and even though the spider would probably last a while I'm one of those...

Cheer's.... Well so far I've done four loads. I'm not open plan but I live in a two bed semi and all my doors are always open. I had to check to make sure the machine was on earlier it really is that quiet. Even on full spin speed it's pretty quiet. My last beko was excellent but the pump was...

Nice high water levels

Well after seven weeks of having the hotpoint S line it had to go. Stupidly long wash times. Over sensitive spin and back with a beko. Beko have got it right with this machine. The pump is quiet. You can virtually hear it. When it's on spin it's a lot quieter and before it finishes the spin to...

My towels are used once then washed. Sheets once or twice a week including weekly wash of my duvet. Don't use makeup lol Pillow cases every week and every month my pillows get a quick steam cycle in the washer

No thanks lol. Over 18 years of repairing washers and hundreds of bearing changes I've never seen one this bad. I've seen a lol with loads of black gel mouldy stuff when people have used liquid The miele came from a soft water area and the owner admitted it's main use was quick washes. Surprise...

Hi guys. If you zoom in my first pic you can see just how much powder was in the machine. I could of filled a couple of boxes. The spider is a mixture of a lot of powder and some corrosion. Plans on hold for it for now as I keep out for a replacement spider. All the other parts have had a deep...

Belive it or not it's washing powder stuck to it. I've had a screw driver and literally sat there for an hour just scraping powder off. Think it's only ever done cold washer as I've never seen a build up like that before. In my eagerness to get the machine fired up I put a wrong connecter on the...

So while it's in bits I'm going to give all the pipes door seal etc a good bleach soak as I don't think this machine has ever seen a hot wash. Now the fun part putting it back together

Pic two ...

As some of you know I bought a miele washer off ebay that just had a water inlet fault. Got the machine home and the drum would not turn at all it was solid. So I thought here we go. Bearing change. Stripped the machine down and it was covered in soap powder inside

Lol I know it's miele. The advert said meile. No one else bid on it partly cos of the fault and I think because it was spelt wrong. I came across it by accident. Fingers crossed it's an easy fix. Will find out tomorrow

Pic 2 ...

Pic one .

Hi guys. I put a post on about my new hotpoint s line washer a few weeks ago and I hate hate hate the machine. Long story short I've bought a meile washer off ebay for £25 with a fault. It's saying check water inlet. I'm hoping it's just a case of replacing the part. Which is an easy fix but...

I seen that last night as well. If it wasn't 280 miles from me I woulda got it to replace my six week old hotpoint which was a waste of 600 quid as I hate it. Gary. If you come across one of the older hotpoints from the 80's could you hit me up. Been looking for a good ish one for a while now

I've been waiting three weeks. It's basically just the seal around the drum that needs replacing. It's an easy job