Search results

Usually a noticeable "click" is heard when the out of balance switch shuts down the machine, although a single rug would certainly be a good candidate to trip it. However, as Malcom mentioned opening the lid should be enough to reset it. Perhaps its stuck in the off position. In any case, I...

drain hole on transmission No, you can't simply do an oil change. The trans case must be opened and the "oil" is actually a heavy gear oil. A failed tub bearing will let itself be known. Suffice it to say, with 30+ years of regular use the machine is no doubt in need of some service. Forgot...

The helical drive trans is one the toughest parts in your A710, its achilles heal is the o-ring oil seal. However, typically by the time that becomes an issue the mounting stem seal and the tub bearing are due replacement as well, so its best to do everything in one shot. I would begin...

certain things I should look for As Washman mentioned, I would ask the dealer to adjust the water level control to the highest setting. (Simply a matter of turning a set screw on the back of water level control). AW member "Combo52" does it for his SQ customers if requested.

It can also be safely transported on it's back, thus reducing the chances of damaging the cabinet sides. I use a minivan and lay the machine on old comforters or moving blankets, this makes it easy to simply slide in or out, usually by myself. Also, remember to tape the door shut and remove...

find an almond or bisque colored Well, here is nice a looking Harvest Gold A606 that can be your first vintage washer and be put into service while the LAT9800 gets rebuilt or a replacement is found. http://losangeles.craigslist.org/lgb/app/4815051826.html

Most men would prefer not to smell Kim Kardashian I wouldn't mind smelling Kim Kardashian...

Maytag Dependable Care washers are very rebuildable. However, to replace the trans most of the washer will have to be disassembled. Not too bad if you're handy and there is plenty info available here and elsewhere online that explains what is involved. If you shop around parts could run between...

29 inch WP built dryers Here are a few Whirlpool 29 inch top lint filter dryers. Some have consoles that are similar to Speed Queen, at a quick glance most people probably wouldn't notice the difference. There are a few door styles and many control options. I prefer the reversible swing out...

recommend a good SQ dealer Why do you shoot AW member "Redcarpetdrew" (AKA Andrew) an e-mail. He is a service tech and just relocated to Concord, CA from Nevada. He may have some suggestions and is a good person to know. [email protected]

I'd pass on those Ebay SQ's, for several reasons: -There is a HE symbol on the lower right corner of the control panel, I assume that means reduced water usage and/or temps. -Are they Raytheon or Alliance machines? They look Raytheon built to me, (not good). -Laundromat use- they may have...

Those photos are nothing compared to some of the crap, rusty appliances people post on Craigslist, describe as in "good" condition and ask top dollar prices. That SQ should clean up nicely, but bargain hard, especially when the seller is open to offers. On the other hand it could be sold...

It's a genuine Speed Queen but I wouldn't pay more than $100 for it. Looks a little rough, probably needs a new drive belt and there appears to be a spot of rust at the lid hinge. Offer $75 for openers.

Inexpensive GE side by sides can be found on Craiglist with nearly the same shelf layout as the old Frigidaire. Like these: http://losangeles.craigslist.org/wst/app/4787140421.html http://losangeles.craigslist.org/sgv/app/4786154269.html

I think the price is a little steep. As a rule, I don't like to spend more than $100 on used DW or W/D's unless they are in excellent condition, i.e. clean, undamaged and in perfect working order.

Is this Maytag DW built before or after the change over to the tall tub design? Appears to be the older style with the tower in the center: http://newjersey.craigslist.org/app/4774474217.html

Off hand, I'd say Lubriplate 630-A should be a safe bet: NLGI 2 (consistency of peanut butter), temp range to 275F. I picked up a 14.5 oz. tube at NAPA several years ago, primarily for automotive use and still have plenty left but the price then was much less, around $3...

the prices are getting outrageous Same in my area... Some items are close to full retail price, but occasional bargains can be found. At first I attributed it to their misinformed slaves, uh hm, "volunteer" staff, but word must have come down to jack the prices up.

like it was on the 608 or the 208. Try the 608/208 agitators on the A806, if they go on easier then the 806 agitator is the problem. I didn't realize you may have spare machines around or would have suggested this earlier.

is it possible to use too much vaseline Could be you over did it with the vaseline and now it's packed into the bottom of the agitator. The rusty color is left over rust, scale, crud, etc, in the agitator. Process of elimination is the way to go now. Throughly clean out the agitator hole and...