Search results

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

  1. R

    Miele little giant programming mode

    On the older machines One had to disconnect the temperature sensor from the pcb before programming mode could be entered
  2. R

    New Miele W2 Nova Edition on Miele Swiss website

    The start of each cycle is fascinating Is the spinning sensing the size of the load? Does the resistance to acceleration measure the load size? Will there be a load sensor on future top models? As inaccurate as it is, I do like having it. Hopefully the top models will continue to have a...
  3. R

    Miele W5740 Problems

    Try cleaning the diverter while its still installed This can be done while still in the machine. Clean the brass finger things and the upper part they touch. Also do not drop the long thin springs down into the machine...
  4. R

    IFA 2024

    The WMV960/963 had brushless drain and recirculation pumps and then the WWV980 went back to the regular type according to the online parts listing. The WMV pumps also appeared to have an inverter board behind the pumps. Cost cutting/supply issue or complexity management?
  5. R

    IFA 2024

    Part number 20 is where the springs attach to the outer drum at the rear and that looks like it always does on the stainless steel tub. I don't see hoses from the water distributor to the rubber ring/gasket. Perhaps no more water on the glass? I don't see a steam generator (Perhaps on a...
  6. R

    Accessing programming mode G7164SCVi

    is it like Door open and turned off: 1) Hold down OK 2) Press the power button 5x and hold it down on the 5th? (all while holding down OK) Service mode is the same but 3x and not 5x
  7. R

    TR9XW80889 - Pretty good

    Looks like too much airflow Almost needs a thick black foam filter to slow down the flow like on other brands of heatpump dryer. I hope you get a fix soon. Richard
  8. R

    Miele B864 ironer tripping breaker

    Hi Rod Does it trip when the soap dispenser opens? I had a machine that had a leak. When the flap opened BANG. Off I wish I had seen this before I removed the steam boiler for my rotary iron. It used to trip the fuse when the steam option was on.
  9. R

    IFA 2024

    Am I dreaming about an annoying fan type noise Like here: and
  10. R

    IFA 2024

    Here is the FB group I joined https://www.facebook.com/share/g/NJRx2pMru4r4HfGD/ I also found this video where the reporter seems to self-demo the new vacuum cleaner. Help yourself at IFA?
  11. R

    IFA 2024

    The dryer @brisnat81 Hi Nathan, I have seen another video and the ribs don't seem to have the metal parts used to sense wetness. Perhaps the annoying tick is gone. Perhaps its done along the front edge of the drum? I saw a video on FB which showed the wash action of the washer. Like an LG...
  12. R

    IFA 2024

    One way to avoid floating clothes is to have a dry-wash but with a spray action. Looking forward to seeing it in action. The current delicates cycle has clothes floating. Hopefully they have the spinning sorted. I remember some initial users not being happy with the spin of the W1. Hope...
  13. R

    AEG drum paddles replacement

    I am guessing that down inside two of the holes There would be screws?
  14. R

    Miele W5000 WPS Super - Is it a Little Giant under the skin

    By scrapped, I hope you stripped it down first I have a W5965 and it has 3 dampers. They are slightly better than what was on the W5873 that we had. The 5873 would shake and rattle on our wooden floors but the 5965 is much better. Looking at the online parts manual, they seem to have RD18FL...
  15. R

    Supco Shock Absorbers are JUNK

    Free play Some shocks have free play. Our FL washing machine has different shocks for wooden floors with free play and it makes a significant difference. We had a similar model without the free play part and those shocks led the machine to shake the house. Did the old shocks have a NM rating...
  16. R

    Miele G5600 "Futura" Dishwasher Error Code F-24

    Have a look at where the cable joins the main PCB A long time ago I had a Miele dishwasher that was corroded where the pressure switch joined the main PCB. It has 4 wires, 2 go to the pressure switch and 2 go to the heater relay. Richard
  17. R

    Miele W1215 Balance/Suspension Issues

    Check The small hose running from the drain pump up to the y connector is clear. The vent hoses need to be clear as it won’t go to full speed if it is not certain the water has not drained. The drum turns in a circle when viewed from the front. If it has an odd shape be wary. If the gap is...
  18. R

    Ironing Services In Germany

    Oh that video The tree women in the ironing house. What a delight! As someone that appreciates ironed clothes and bedding, their comments were hilarious. Later I saw a Facebook post by Miele Australia. They seem to have a soft spot for insta-nothing types promoting their products. As someone...
  19. R

    Steam Oven

    Steam oven Hi, I collect broken Miele appliances and revive them, and I am the owner of 2 steam ovens and 1 combination steam oven. I have had success in making bao buns and have liked the Maggie Beer creme anglaise and the roasted chicken. I found the recipes from the Miele Australia YouTube...
  20. R

    Miele Washer Dryer - WT1 - PowerWash2.0 & Twin Dos

    WTH, Rinse out fluff is not on the dial! This was my favorite cycle. If only clothes could be washed with such vigor.
Back
Top