Search results

This album contains media files from lightedcontrols's collection.

The PINK Frigidaire Dryer DCIF 62

..."and after a full cycle"... ....the laundry comes out clean, dry, and VERY WRINKLED!

I'm with John on this.... ...you also might want to check that the water line isn't crimped when the fridge is pushed back into place restricting the water flow. Mark

Well grasshopper... you've made me proud!

my 2 cents... If the machine is level, and the tub is still off by half inch, you might want to check the damper pads and replace them. Lint removal is best on full loads. At small, there is no water that circulates through the agitator filter. Without hearing the thud it's hard to even make...

Congratulations! Greg, I had a machine just like this in my first apartment! I absolutely LOVED it. When I bought my first house, the old GE went to the curb, and a new THERMADOR steam machine was installed. While those dishwashers didn't have a filter in them, they still did a great job. I...

Petek ...Go get yourself a Miele and be done with it. Put the KA on Craigslist and bid it a farewell!

With machines that age... ..it was most likely the tub boot. Still available. You tossed some wonderful machines.

The best way to see if the balance ring is... defective, is to remove it and let it spin. That ring is only useful when there is a load of clothes in the tub. An empty tub with no ring should spin perfectly....we're not talking Whirlpool here..... jus sayin...

Don't do that,,,, Remove the water flume and soak the entire hose unit in Lemi-Shine overnight. Reinstall and it'll be like new!

The washer is 3 and a half years old. AWN series... When the machine starts to spin it almost immediately goes out of balance violently. I removed the tub balance ring and ran it empty, and it does the same thing. Thinking it had to be the springs, I replaced them all. Same problem. No...

I worked on my second Speed Queen yesterday. The machine was about 9 and a half years old. The motor was overheating and the thermal was kicking out. Since I was replacing the motor anyway, I went ahead and replaced the belt and pump (which comes as a fix kit) too. Took not quite an hour and...

I will never understand.... ...why you guys buy this crap and then EXPECT it to work. Just beyond me.

I haven't seen... ... a lot of dependability from the KitchenAid dishwashers. Lowe's sells bunches of them as it's their quietest dishwasher, and I work on them almost every day. No specific bad parts other than controls....lot's of controls!

The one thing that I always do is... ...take a fairly thick felt drum seal, and using hi-temp glue, glue it around the outside of the drum lip so that all of the heat from the elements go through the heat holes in the front of the drum. This will also keep anything from falling into the...

Nope. The new motor replacement will have a sealed cent switch but no substitutes are available at this time.

Hate to be the one to tell you this.... but my sources, and they are pretty good, are telling me that the agitator washer will be phased out THIS year. I've seen the new design so I know it's on it's way.....just sayin....

If .... ...the door lock is defective you may not be able to open it using the controls. Unplug the machine and wait about 15 minutes. See if the door will open. If the washer has an access panel at the bottom, remove it. There will be a plastic pull ring that will unlatch the door just...

I have heard through the grapevine... ... that it won't be long before Speed Queen will be manufacturing top loaders with the infamous disc in the bottom of the machine and a new mechanism a 'la the Cabrio, Bravos, etc... (pictures of the new mechanism have been seen) .... (and no I can't...