66 Frigidaire Custom Imperial dishwasher

[dynaflow]

recently picked up a 66 Frigidaire dishwasher the inlet hose r rotten water inlet valve is at the top right back of the cabinet cant figure out how to get panel off any help appreciated

 

[rockland1]

That cutting board top will have to be removed. Look for some screws at the underside front.

 

[bajaespuma]

Pretty machine! Wasn't this machine (built-in version) one of the dishwashers used in the kitchen on Bewitched? I would love to see some shots of the interior and the racks when you can get around to it.

 

[turquoisedude]

WOW! What a beauty!! Great score, Ron!!

 

[philr]

Nice machine!

 

[toploader55]

"Chopping Block Top"

Restoring that Beautiful Slab of Wood can be done by sanding the top with an Orbital Sander with a series of Sandpapers.

After you get it where you want, Tack Cloth it and then rub multiple saturations of Mineral Oil. Available at CVS.

 

[firedome]

I'd use

a straight line sander not an orbital or belt.
Love the machine!!

 

[lebron]

Nice Frigidaire dw! Looks to be in great shape.

 

[1952crestwood]

Nice Dishmobile.

Looks almost exactly like my 1965 turquoise one. I've never tried to take mine apart, or even gotten a chance to use it yet, but I've heard some good things about them on here. Good catch!

 

[dynaflow]

hey 1952 crestwood

too bad i didnt make contact with u last month I was in Arlington for my Aunts retirement would love to have seen urs too
Ron

 

[dynaflow]

no much luck

fashioned a makeshift drain hose for the DW filled her with 2 large stock pots of boiling water let it soak for a few mins plugged her in set it for light wash started to pump out pump keep running it never did stop any ideas guys about ready to scrap her, admit Im not the brightest bulb in the string but this has the best of me

 

[varicyclevoice]

question

I am not all that familiar with Frigidaire machines, but is it possible that the drain valve is stuck in the open position?

I hope you don't scrap the machine. It might be great to convert to a built in model and hopefully someone out there has replacement parts for this machine.

 

[norgeway]

All right Ron!!!

Dont you DARE scrap it!! I will get down there sometime and cast the demons out of it! LOL

 

[brisnat81]

Hi Dynaflow,

where is the drain hose coming out? Through the top, or straight out the back?

I have the built in version of this one and stenciled on the back of the machine is a requirement to have a loop at least 24" above the ground.

If you get the hose down low, it starts with littls spurts coming out whilst it washes.

 

[dynaflow]

its a portable

comes out thru the top

 

[1952crestwood]

Sorry I missed your visit Dynaflow....

but maybe you will get back up this way sometime to see my turquoise sister to your Dishmobile. Please don't give up on it. With all the sweet, helpful and technically skilled people on here, your DW is bound to get some help and have a future. If it's of any help to keep you inspired, I posted the link to the thread from 11-16-09 when I got mine home. Lots of good info there from members who were cheering me on. Good luck with the unit and keep us posted as to it's progress.
Robyn

My First Dishwasher! 1965 Frigidaire Custom Imperial Dishmobile

Hi to all, Well after MUCH hassle and aggravation, I finally got my first vintage dishwasher home! I will let the pics speak for themselves, but I couldn't be happier with it. I haven't tried to hook it up or run it yet, but I wanted to get some shots into the forum. I found a date stamped on...

www.automaticwasher.org

 

[philr]

If you press "cancel" on the timer, what happens?

 

I'm guessing your timer isn't working correctly... It might be easy to repair.

 

[philr]

If you press "cancel" on the timer, what happens?

 

I'm guessing your timer isn't working correctly... It might be easy to repair.

 

[dynaflow]

Phil

nothing it just kept pumping out never stopped maybe a timer failure since it has sat for so long