Fabric Softener Dispenser for BD Whirlpool

[brisnat81]

Hi Guys,

I'm looking for a fabric softener dispenser for a BD whirlpool that they're willing to part with. I'm more than happy to pay a fair price plus postage and something for your time.

Repair clinic doesnt ship to australia, plus as I dont have a US model number to line up with, I cant tell which dispensers are DD and which are BD.

Thankyou to anybody who can offer assistance,

Kind regards

Nathan

 

[goatfarmer]

If I have one,you can have it for the cost of shipping. Let me look this weekend.

kennyGF

 

[brisnat81]

Thankyou

Hi Kenny,

My email address is [email protected]

I'll send you an email to the address listed in your profile.

Thanks

Nathan

 

[kenmore1978]

FS dispenser

Dual Action or regular agitator?

 

[brisnat81]

Agitype

Hi Kenmore1978,

Regular Agitator. I'm assuming you unscrew the normal agitator cap and screw on the dispenser? Or does it just push over the normal agitator cap?

Nathan

 

[DADoES]

The dispenser fits atop the agitator cap, the cap is not removed.

 

[kenmore1978]

FS dispenser

The reason I asked is that I have a dispenser, but it's for a Dual Action agitator (large cap). It came with the new agitator for my '78 LK, but the LK has the Triple Dispenser

 

[goatfarmer]

Nathan,let me describe what I found,maybe someone will know what it fits,and if it's what you need.
Looking at the top,it says "FABRIC SOFTENER DISPENSER",with a clockwise arrow that says "TIGHTEN SECURELY"At the top it's about 5 1/2" diameter,the bottom is about 4 3/4" diameter. It has 4 tabs on the bottom to attach to the agitator. It's about 4 1/2"tall.The outer part unscrews from the inner part.
There are 2 numbers on the inside.One says FSP WC2 355006G and the other is 357377W.
Any thoughts?

kennyGF

 

[brisnat81]

Thanks for that Kenny,

Does anybody know how these dispensers attach?

Thanks

Nathan

 

[brisnat81]

Repair Clinic

If I do a search on Repair Clinic, for 355006

It comes up with http://www.repairclinic.com/0081.asp?RccPartID=470601. This picture shows a dispenser kit with a typical BD screw on bolt.
If I then search for 357377 it displays the same part kit.

Does the part have a nut on the bottom or just the 4 clips?

If I search on Partselect.com for 355006
it comes up with this http://www.partselect.com/xq/aspx/Inventory.334437/qx/PartDetail.htm?SourceCode=3.

The sears website when searching for 355006 or 357377
Brings up COVER DISPENSE, but no picture.

It sounds like a close bet that this is the right part.

Nathan

 

[goatfarmer]

There is no nut,just 4 tabs that would slide on the agitator.
Let me get a few pictures to post later.

 

[goatfarmer]

dispenser pictures

Picture of the top.

 

[goatfarmer]

Bottom picture.Look like the one you need?

 

[brisnat81]

surgilator cap

Hi Kenny,

Based on what comes up on Repair clinic it would appear to be correct. Do you have a surgilator cap that you can push it on to, to see if it fits?

What is the diameter between two of the tabs?

All else failing let me know postage costs and I'll risk it.

Thanks muchly

Nathan

 

[goatfarmer]

Sorry,no cap to try it on.Distance across 2 opposite tabs is approx 3 1/4"Let me figure out shipping.

kennyGF

 

[DADoES]

I'm not an expert, but Goatfarmer's dispenser looks like a Kenmore, not a Whirlpool. It may not fit a Surgilator cap.

 

[brisnat81]

Hmmm

Thanks Daddoes, I'm not sure myself.

The current dispenser kit on repair clinic looks the same and comes up for both kenmore and whirlpool.

I'll give it a go, and worst case scenario I'm out $30AUD.

Unless anyone else has a difinitive answer or a dispenser that comes directly off a surgilator.

I appreciate your input. Keep it comming

Thanks

Nathan

 

[DADoES]

I believe this is the dispenser you need, assuming this is the Surgilator cap that you have.

 

[brisnat81]

That is similiar to the cap I have, except mine doesnt have all the ribs on the side.

It has the bumps that sit in the 3 depressions on each side but not all the other ribs.

How does the dispenser grip onto the surgilator cap? Using the 3 depressions?