Woke last week to make pancakes and this is how my range greeted me. Yes I had a bit of a melt down LOL. At this point I'm debating if I should just buy a new range altogether in that this will probably keep happening ever few years.
Friends Don't Let Friends Buy GE
- Thread starter Chetlaham
- Start date
Help Support :
Partially heating two size element
This has nothing to do with it being GEGE uses the same elements. Everybody else uses in their electric ranges.
Why wouldn’t you just fix it? It’s a simple repair. It’s probably bad element possibly a bad wire connection or even a bad two level infinite switch.
I’m sure glad I didn’t see your temper tantrum, lol
John L
This has nothing to do with it being GEGE uses the same elements. Everybody else uses in their electric ranges.
Why wouldn’t you just fix it? It’s a simple repair. It’s probably bad element possibly a bad wire connection or even a bad two level infinite switch.
I’m sure glad I didn’t see your temper tantrum, lol
John L
I'm debating if its even worth it as it will just keep happening every X number of years.
You didn't miss much in the way of entertainment, just some tears, unless the counts as reality TV.
There used to be a time when those Avocado ranges lasted 40+ years and elements could be swapped without a screw driver.
You didn't miss much in the way of entertainment, just some tears, unless the counts as reality TV.
There used to be a time when those Avocado ranges lasted 40+ years and elements could be swapped without a screw driver.
Smooth top surface elements
Seem to be far more reliable than the old Cal rod units, we probably only replace one or two of these a month compared to the several dozen a month we replaced to the older type element. And the plug-in surface elements were the worst because the contacts always failed on the big elements especially.
Just like with Cal rod type elements good cookware will make the heating elements last a lot longer on the smooth top ranges as well. Are you using good cookware?
John L
Seem to be far more reliable than the old Cal rod units, we probably only replace one or two of these a month compared to the several dozen a month we replaced to the older type element. And the plug-in surface elements were the worst because the contacts always failed on the big elements especially.
Just like with Cal rod type elements good cookware will make the heating elements last a lot longer on the smooth top ranges as well. Are you using good cookware?
John L
I'm using cast iron (Lodge) and All-Clad cookware. The big burner gets lots of use.
to chetlaham
Get something else! Stay away from GE! I should've known this with their plastic tub laundry!
Get something else! Stay away from GE! I should've known this with their plastic tub laundry!
Sadly other than getting a Garland or the like, I don't know of any what residential range that will fit my liking.
GE Ranges
Actually, out of the major brands that manufacture ranges, I don't think you can do much better than a GE. Saying that, I'm not sure if anything has changed more recently but I'm sure John would have better direction on that being in the repair business.
However, I will say, when I bought new appliances 10 years ago I shopped around quite a bit. I was surprised at how consistent the feedback was that GE made the best range out of the bunch from a functionality, build quality and reliability perspective (excluding premium, boutique or commercial brands). I was shocked that even appliance dealers that didn't carry GE, who were very quick to put down some of their other products, would admit that GE stoves were one of the best. I did ultimately buy GE and I have to agree, they make a great stove. I've never had any problems, they feel very well built compared to others I've used, bake beautifully, heat quickly, have great features, look great and are easy to keep clean. Mine is an induction but I believe the feedback was consistent across the rest of their ranges.
I admit this is only my experience however I think there are several other members on the board that have also bought newer GE ranges over the past several years and also had positive things to say.
I think GE has had a bit of a hit or miss reputation over the years with some of their products, but I do believe they've always been pretty consistent at making a great stove, even way back. If I had to buy new again, I wouldn't personally buy anything else.
Actually, out of the major brands that manufacture ranges, I don't think you can do much better than a GE. Saying that, I'm not sure if anything has changed more recently but I'm sure John would have better direction on that being in the repair business.
However, I will say, when I bought new appliances 10 years ago I shopped around quite a bit. I was surprised at how consistent the feedback was that GE made the best range out of the bunch from a functionality, build quality and reliability perspective (excluding premium, boutique or commercial brands). I was shocked that even appliance dealers that didn't carry GE, who were very quick to put down some of their other products, would admit that GE stoves were one of the best. I did ultimately buy GE and I have to agree, they make a great stove. I've never had any problems, they feel very well built compared to others I've used, bake beautifully, heat quickly, have great features, look great and are easy to keep clean. Mine is an induction but I believe the feedback was consistent across the rest of their ranges.
I admit this is only my experience however I think there are several other members on the board that have also bought newer GE ranges over the past several years and also had positive things to say.
I think GE has had a bit of a hit or miss reputation over the years with some of their products, but I do believe they've always been pretty consistent at making a great stove, even way back. If I had to buy new again, I wouldn't personally buy anything else.
kalanikaau1
Well-known member
Reply# 5
My 60 day old GE french door fridge has already malfunctioned, there was excessive frost buildup in the freezer compartment because of the door gasket not sealing properly.
GE sent a very knowledgeable and professional repair person to address the problem, as it turned out GE recently released a slightly thicker gasket of which the tech had on hand.
The outstanding tech replaced the gasket in less than 5 minutes, I was in awe of his efficiency and the fact that he had the part on hand!
I had done extensive research prior to purchasing the GE, it does not feature through the door ice/chilled water service, rather an old fashioned ice-maker in the freezer and a chilled water dispenser within the fridge section because I've experienced too many problems with previous units with through the door dispensing.
Another criteria was that it had to be all white, I've had it with the so-called "stainless steel" look, all appliances I've owned and finished as such were rust magnets.
I asked for his honest opinion on which brand of fridge to buy, he said GE is distinctly the first, Whirlpool a distant second and Frigidaire an even more distant third.
He also said to avoid any of the Korean brand fridges at all costs...
My 60 day old GE french door fridge has already malfunctioned, there was excessive frost buildup in the freezer compartment because of the door gasket not sealing properly.
GE sent a very knowledgeable and professional repair person to address the problem, as it turned out GE recently released a slightly thicker gasket of which the tech had on hand.
The outstanding tech replaced the gasket in less than 5 minutes, I was in awe of his efficiency and the fact that he had the part on hand!
I had done extensive research prior to purchasing the GE, it does not feature through the door ice/chilled water service, rather an old fashioned ice-maker in the freezer and a chilled water dispenser within the fridge section because I've experienced too many problems with previous units with through the door dispensing.
Another criteria was that it had to be all white, I've had it with the so-called "stainless steel" look, all appliances I've owned and finished as such were rust magnets.
I asked for his honest opinion on which brand of fridge to buy, he said GE is distinctly the first, Whirlpool a distant second and Frigidaire an even more distant third.
He also said to avoid any of the Korean brand fridges at all costs...
GE ranges reply number seven
Hi James, I completely agree with what you wrote. GE is consistently built better ranges both gas and electric than most other companies over the many decades going all the way back to the 50s.
As much as I like many whirlpool products, they have just never consistently built a great range. Some were pretty good. Some have been awful, Frigidaire has been fairly good. The last couple decades, but they’re in induction ranges are extremely expensive to repair and usually end up getting trashed if you have problems with the power coils.
Companies like Bosch we hear nothing but problems with their ovens not working right for example along with some of the other high-end ranges like Viking and Meile.
John L
Hi James, I completely agree with what you wrote. GE is consistently built better ranges both gas and electric than most other companies over the many decades going all the way back to the 50s.
As much as I like many whirlpool products, they have just never consistently built a great range. Some were pretty good. Some have been awful, Frigidaire has been fairly good. The last couple decades, but they’re in induction ranges are extremely expensive to repair and usually end up getting trashed if you have problems with the power coils.
Companies like Bosch we hear nothing but problems with their ovens not working right for example along with some of the other high-end ranges like Viking and Meile.
John L
Re:#4
The use of cast iron pans on a ceramic cooktop is not recommended in the owners manual of my 3 year old GE ceramic top range. This could be a reason for the failure of the center part of the large element. Cast iron retains heat more than any other type of cookware and may have caused the element to overheat.
I also notice that your stove top has lots of scratches on it and the cast iron pans were most likely the cause. I’ve never used a cast iron pan on my GE ceramic top range and the stove top still looks like brand new.
I’ve owned GE electric ranges for over 25 years now and they’ve all been really excellent performers.
Eddie[this post was last edited: 3/11/2025-12:45]
The use of cast iron pans on a ceramic cooktop is not recommended in the owners manual of my 3 year old GE ceramic top range. This could be a reason for the failure of the center part of the large element. Cast iron retains heat more than any other type of cookware and may have caused the element to overheat.
I also notice that your stove top has lots of scratches on it and the cast iron pans were most likely the cause. I’ve never used a cast iron pan on my GE ceramic top range and the stove top still looks like brand new.
I’ve owned GE electric ranges for over 25 years now and they’ve all been really excellent performers.
Eddie[this post was last edited: 3/11/2025-12:45]
James, I agree, GE does make the best residential stoves. In fact I'd say there residential stoves cook better than many commercial models, even though I love commercial models for the durability.
Eddie, yes, you observed and guessed right! I do use a lot of cast iron cookware. Pans, griddles and pots. Cast iron lasts, easier to clean, durable, does no wear down, heats very evenly, less temperature fluctuations, gives excellent sear, maintains flavor, and no toxic chemicals to leak into food. 10/10 cooking.
Do you know what works best with cast iron?
Eddie, yes, you observed and guessed right! I do use a lot of cast iron cookware. Pans, griddles and pots. Cast iron lasts, easier to clean, durable, does no wear down, heats very evenly, less temperature fluctuations, gives excellent sear, maintains flavor, and no toxic chemicals to leak into food. 10/10 cooking.
Do you know what works best with cast iron?
Chet,
If you want to use cast iron pans regularly then I’d recommend having either a coil top electric stove or a gas stove.
Eddie
If you want to use cast iron pans regularly then I’d recommend having either a coil top electric stove or a gas stove.
Eddie
Best cookware for a smooth top electric range
Cast-iron is fine if it’s ground completely flat typical older cast-iron was not completely flat but the high-end stuff like Le Creuset is good.
Keep in mind that aluminum stainless steel combined with aluminum or copper cooks Much better than cast-iron. It reacts faster to temperature change and spreads heat more evenly, cast-iron is a pain in the you know what to clean because you can’t put it in the dishwasher.
If you want to use regular cast-iron, the best thing to use is a gas range or an induction range. It also does not work well on coil top burners because it doesn’t make good contact with the raised ridges around the edge of it and it causes the coil burners to overheat and fail.
John L
Cast-iron is fine if it’s ground completely flat typical older cast-iron was not completely flat but the high-end stuff like Le Creuset is good.
Keep in mind that aluminum stainless steel combined with aluminum or copper cooks Much better than cast-iron. It reacts faster to temperature change and spreads heat more evenly, cast-iron is a pain in the you know what to clean because you can’t put it in the dishwasher.
If you want to use regular cast-iron, the best thing to use is a gas range or an induction range. It also does not work well on coil top burners because it doesn’t make good contact with the raised ridges around the edge of it and it causes the coil burners to overheat and fail.
John L
I think we'll have to agree to disagree, I find cast iron to be the most even. I don't like cookware responding quickly to temperature changes, I like having residual heat for control and to balance things out. Temperature swings reduce cooking results.
With a good seasoning cast iron is easy to clean. It becomes a tough enamel that is impervious and lets soils slide right off. Cast iron becomes easier to clean the more you use it.
With a good seasoning cast iron is easy to clean. It becomes a tough enamel that is impervious and lets soils slide right off. Cast iron becomes easier to clean the more you use it.
Using regular cast iron pans on an induction range that has a ceramic cooktop will result in the same scratched surface that Chet has on his GE smooth top range now. I used regular cast iron pans on my old coil top electric stove and never had a burner fail.
I liked using my cast iron pans but to me it was worth giving up using them for the ease of cleaning that comes with a ceramic cooktop. What a time saver! Most of my cookware is Farberware Classic which is stainless steel sandwiched with an aluminum core. It heats very evenly and doesn’t scratch my stove top. I have one older 1 1/2 qt. Farberware sauce pan that has the older design with an aluminum bottom. This pan will leave minor aluminum transfer marks on the stove top, but they come right off with a smooth top cleaner like Weimans or Cerma Bryte.
Eddie[this post was last edited: 3/11/2025-11:26]
I liked using my cast iron pans but to me it was worth giving up using them for the ease of cleaning that comes with a ceramic cooktop. What a time saver! Most of my cookware is Farberware Classic which is stainless steel sandwiched with an aluminum core. It heats very evenly and doesn’t scratch my stove top. I have one older 1 1/2 qt. Farberware sauce pan that has the older design with an aluminum bottom. This pan will leave minor aluminum transfer marks on the stove top, but they come right off with a smooth top cleaner like Weimans or Cerma Bryte.
Eddie[this post was last edited: 3/11/2025-11:26]
I'm also leaning toward having cal-rod heating elements. Does anyone know of a range that comes in both stainless colors and comes with calrod heating elements?
Re:#16
Chet,
GE still makes two coil top electric stoves in SS. See the link.
Eddie
www.geappliances.com
Chet,
GE still makes two coil top electric stoves in SS. See the link.
Eddie
Stainless Steel Ranges from GE Appliances
www.geappliances.com
Thank you!
