frigidaire stove, ge top load washer, maytag A608...

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

hippiedoll

hippiedoll

Well-known member
Joined
Feb 12, 2013
Messages
2,028
Location
arizona
i went to this storage facility type sale, where a guy works on washers, dryers, stoves and refrigerators. and there are storage units towards the back of this man's shop. and inside one of the storage units, there was quite a few washers, and stoves in there. so, i decided to snap some pictures of some that i figured others would get a kick out of seeing. please bare with me, i tried to take alot of pictures. sorry if some of them came out blurry.

enjoy....

first up is pictures of a turquoise electric frigidaire stove:

hippiedoll++4-7-2014-03-28-35.jpg
 
a newer maytag top loader....

picture #2 inside washtub (no center agitator instead 2 pulsator wheels at the bottom)...

hippiedoll++4-7-2014-03-41-21.jpg
 
maytag A608....

picture #5 (THE LINT FILTER #3)....

now when i tried to lift the lint filter out, it felt like it was kinda stuck. so i gave it a good pull and it loosened up & came out. it kinda had the feeling of like dried out dirt, when it breaks apart, when your pulling out weeds.
but come on now, when was the last time someone cleaned out this lint filter? did they ever clean out the lint filter?? i'm guessing they probably didn't even know that there was a lint filter in the top of the agitator???!!!
just look at all that build up. the poor A608. aside from the super built up lint on the filter, there was a dent on the left hand side of the top cover (where the lid is) that had some of the white porcelain chipped off. and the front panel had been removed & wasn't put back on correctly cuz the left side clip at the top was sticking out of the top of the front panel!!! and i'm pretty sure the tube that was in the washtub was the tube that connects from the bleach funnel to the bottom of the outer tub!
YIKES!!!

hippiedoll++4-7-2014-03-51-7.jpg
 
i was pretty excited....

to walk around in that back storage shed. and especially when i spotted the maytag A608 (even if it was white)! but when i seen that lint filter, it kinda made me cringe. and then i seen the chipped paint & bang dent on the top and i felt kinda bad for the old maytag A608. i mean, the buttons looked lovely with great paint on them. but i'm not even sure if this maytag was even working anymore??? couldn't plug it in anywhere to try it out. and being that the front panel wasn't even put back on correctly, i kinda had a feeling that maybe someone was tinkering around down there and maybe didn't know exactly what they were doing???

:o/

hope you all enjoyed these pictures i took.
 

Similar threads

combo52
Pink1960 whirlpool gas combination washer dryer
2
Replies
22
Views
55
cfz2882
C
stuftrock1
Anyone know anything about post-FF GE washers?
2
Replies
25
Views
26
gelaundry4ever
G
P
Making a Frigidaire RS-35 range knob
Replies
7
Views
17
piglet
P
Ultramatic
Appliances: The Future is Battery Powered
3 4 5
Replies
83
Views
84
tolivac
T
P
Found a Possible 1985 GE Filter Flo Washer to Buy - Opinions Wanted
Replies
9
Views
10
neptunebob
neptunebob

Latest posts

Back
Top