LCD panel from the 80s? Was this a good dishwasher?
https://www.facebook.com/marketplace/item/752281289680275/?mibextid=6ojiHh
https://www.facebook.com/marketplace/item/752281289680275/?mibextid=6ojiHh
GE 2800
- Thread starter jil1000
- Start date
Help Support :
It was an excellent dishwasher.
I believe it's a vacuum fluorescent display (VFD).
https://www.google.com/search?q=vacuum+fluorescent+display&tbm=isch
Had one for many years at the time it was one of the best performers. Lots of options and neat features.
That said, performance wise my current KA cleans rings around all the DW's I've owned.
That said, performance wise my current KA cleans rings around all the DW's I've owned.
potatochips
Well-known member
- Joined
- Sep 9, 2016
- Messages
- 545
I have the Canadian version of this machine. As others have said, the electronics can be spotty. The motor in mine has caused some dodgy things on the circuit boards which I plan on messing with at some point in my life. Right now its sitting underneath my stairs.
1980s GE electronic Dishwashers
Most important thing to do if you have one of these that you want to actually use his to replace the motor with the new high-efficiency motor. Otherwise the draw from the old black motor tends to ruin the boards.
If you wanted to keep the original motor and all the inherent noise and heat output, put a relay on it so that you don’t damage the circuitboard.
I have seen many of the GSD 2800 and the similar 25, 2600 models burn up the boards on the motor contacts.
John.
Most important thing to do if you have one of these that you want to actually use his to replace the motor with the new high-efficiency motor. Otherwise the draw from the old black motor tends to ruin the boards.
If you wanted to keep the original motor and all the inherent noise and heat output, put a relay on it so that you don’t damage the circuitboard.
I have seen many of the GSD 2800 and the similar 25, 2600 models burn up the boards on the motor contacts.
John.
rinso
Well-known member
We had one in the last half of the 80's. It was one of the best dishwashers we've owned, along with our non-reverse rack Maytag in the 90's.
It is just the motor that poses a risk to the board or does the 900-Watt heater in my GE2800 also draw power through the board with no relay?
I did replace the pump pretty much as soon as I got the machine, even though it was working fine. The electronics on mine have always behaved 100% perfectly and correctly, so far!
Mark
I did replace the pump pretty much as soon as I got the machine, even though it was working fine. The electronics on mine have always behaved 100% perfectly and correctly, so far!
Mark
