GE Power Shower
- Thread starter goatfarmer
- Start date
Help Support :
bradfordwhite
Well-known member
I wonder if this is a model with the cute little mini spray arm under the silverware basket. The "power scrub" I think it was called.
I found one of these in the early 80s. It ran but had a golf ball sized rust hole in the tub very near the motor so....
But before sending it off to the metal recyclers I was sure to take out the mini spray arm and hose that fed it along with a few other parts.
I found one of these in the early 80s. It ran but had a golf ball sized rust hole in the tub very near the motor so....
But before sending it off to the metal recyclers I was sure to take out the mini spray arm and hose that fed it along with a few other parts.
I do believe it's called Silver Shower.
Power-Shower was the mini wash arm under lid that sprayed water downwards.
Silver-Shower was a small wash arm off main lower that directed spray of water up towards silverware basket. IIRC this was a TOL feature that came with General Electric's last gasp of top loading dishwashers. Like everyone else they soon ditched that design in favor of loading from front.
www.automaticwasher.org
Silver-Shower was a small wash arm off main lower that directed spray of water up towards silverware basket. IIRC this was a TOL feature that came with General Electric's last gasp of top loading dishwashers. Like everyone else they soon ditched that design in favor of loading from front.
1965 GE MOBILE MADE DISHWASHER with SILVER SHOWER
Hello everyone! I saw the thread from a while back for the this dishwasher here in Los Angeles and I saw that no one won the ebay auction. I emailed the seller and he said he did indeed still have it for sale. I went today and picked it up for $120.00 I wouldn't have paid so mch except for the...
www.automaticwasher.org
" It ran but had a golf ball sized rust hole in the tub very near the motor "
Rust holes at bottom of these GE Mobile Maid tubs were common enough. Mine came with one as well. Patched it up with JB Weld marine bond and that was that, it's held up ever since.
https://www.automaticwasher.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?54735
Problem was the inner tub liner used by GE (Plastisol) wasn't most durable. One crack or dent and water worked its way between liner and metal outer tub lead to rust that could spread like cancer.
Why GE stuck with Plastisol long as they did for dishwasher interiors one does not know.
Rust holes at bottom of these GE Mobile Maid tubs were common enough. Mine came with one as well. Patched it up with JB Weld marine bond and that was that, it's held up ever since.
https://www.automaticwasher.org/cgi-bin/TD/TD-VIEWTHREAD.cgi?54735
Problem was the inner tub liner used by GE (Plastisol) wasn't most durable. One crack or dent and water worked its way between liner and metal outer tub lead to rust that could spread like cancer.
Why GE stuck with Plastisol long as they did for dishwasher interiors one does not know.
GE used plastisol dishwasher interiors, because
It’s greatly reduced cost to manufacture, and most of all because it greatly reduced expensive damage claims because of porcelain chipping.
Porcelain chip complaints nearly put KitchenAid out of business, we used to scrap so many brand new dishwashers because they had chips tanks. And the problem got really bad when they KD 18 series dishwashers were released because they took the gasket off the edge of the door and customers would drop a dish on the edge of the door and made a nasty chip and there was no way you could get out of having to replace the entire door in warranty.
This is why whirlpool and Frigidaire cleverly went to a molded plastic inner door because of the durability of it.
GE was always a low level dishwasher until the 80s when they actually got serious about building dishwashers and one that actually cleaned and was fairly durable.
John.
It’s greatly reduced cost to manufacture, and most of all because it greatly reduced expensive damage claims because of porcelain chipping.
Porcelain chip complaints nearly put KitchenAid out of business, we used to scrap so many brand new dishwashers because they had chips tanks. And the problem got really bad when they KD 18 series dishwashers were released because they took the gasket off the edge of the door and customers would drop a dish on the edge of the door and made a nasty chip and there was no way you could get out of having to replace the entire door in warranty.
This is why whirlpool and Frigidaire cleverly went to a molded plastic inner door because of the durability of it.
GE was always a low level dishwasher until the 80s when they actually got serious about building dishwashers and one that actually cleaned and was fairly durable.
John.
Always found GE dishwashers from 1980's interesting.
Their electronic machines like GE 2500 or 2800 were so cool to one's young self.
Their electronic machines like GE 2500 or 2800 were so cool to one's young self.
This looks like the US version of my Canadian Talisman GE dishwasher - it more than likely has the 'Silver Shower'. I could use that silverware basket - mine's worn out....
