It's raining 806's! (pretty much...)

[mrb627]

Document

Dane,

If you could document the procedure with pictures, that would be great. My panel is the aqua blue. Sounds like it might be a good project for the weekend.

My white section could use a little help too, but I don't know where I would find another vintage Maytag decal.

 

[gansky1]

Very nice work - just like new again!

 

[danemodsandy]

Malcolm:

Yeah, that would be a good idea - my contribution to the board.

For a Maytag decal, scan a Maytag logo, adjust the size, clean up in something like PhotoShop or GIMP, then print out. Cut to size, use spray adhesive on the back, press in place. Last step would be cutting a little piece of transparent Contact paper - just a little larger than the "decal" - and pressing that into place over the paper, to protect it. Not perfect, but much better than nothing.

 

[mickeyd]

Hey Drew, the lid to my WP is permanently removed so I can s

With your skill you could retro-fit it onto your Tag. Maybe the former owner was a washoholic too, and couldn't stand to have all the sweet buttons hidden by the lid, and took it off like I did. Let me know if you want the lid. Still can't get over all the whorls, swirls, tides and eddies, and octopus sucker holes in your whirl-away drain shot. mmm mmm mmm

 

[redcarpetdrew]

where I would find another vintage Maytag decal

Drop me an email. I have the nos 'MAYTAG' decals for the white consoles...

RCD

 

[goatfarmer]

Nice machines! Another Maytag set lives on.....

 

[autowasherfreak]

GREAT JOB GUYS!

I just love my Maytag 806. You guys did a wonderful job on restoring her.

How do you know if the pads need to be replaced? When my 806 is agitating it makes a grumbling type noise, and I have been wondering what is causing it.

Again, Great Job!

 

[bosch2460]

Oh, I am sooo jealous. I love 806's. Very nice job with all of your fix-ups. Keep the pics and vids coming....it's all I have since I cannot seem to find any 806's around my neck of the woods for me to snatch up.

 

[qsd-dan]

How do you know if the pads need to be replaced?

You can see them peeking out from under the damper in post# 388873. A few more loads, and there would have been some bumpin and grindin goin on, lol.

 

[qsd-dan]

Dan promised me a picture of them in place and working. RIGH

Well, here's half of the pair. The 808 dryer is temporarily taking the place of the Kenmore until I get some new seals for it. I'm diggin the 808 so much I may be VERY lazy getting around to that repair The HDE806 dryer still needs a complete tear down which will happen....soon...hopefully. Hey, it's almost the crazy holiday season!

I spent a couple hours making some tedious adjustment to the washer. Got the inner tub perfectly centered and it now balances beautifully with an empty tub during the spin cycle. Broke out the digital calipers and adjusted the drive lug as it was set a little too tight. Adjusted the pump belt as well.

On the first load, I had a seeping hose leak at the beach nipple to tub hose and one at the pump drain hose. No biggie. The centering springs need to be tightened down a little tighter, with a 1/2 extra turn or so on the right spring to perfectly center the tub after a spin. Right now, I got her soaking some of those down right dirty clothes I was wearing while bringing her back to 100% operation.

Sorry for the fuzzy pic, but the camera gets very fussy when I turn the flash off.

 

[redcarpetdrew]

It's about freaking time...

Nice to have a lit up laundry room, isn't it? For someone who is SO Maytag like you are, it took you forever to kick out that 'mangy' Kenmore... (Ducks and runs like Hell while watching for Gordon, too!!!)

RCD