Jeep considers production in China
- Thread starter ronhic
- Start date
Help Support :
Great. Now we'll have made-in-China cars that poison us.
cfz2882
Well-known member
jeep in china
i don't know about now,but for a while,starting around 1984,jeep had a joint venture with a chinese automaker to do kit assembly of the small jeep cherokee-(xj?)There was also kit assembly of jeeps in egypt for a while.
i don't know about now,but for a while,starting around 1984,jeep had a joint venture with a chinese automaker to do kit assembly of the small jeep cherokee-(xj?)There was also kit assembly of jeeps in egypt for a while.
danemodsandy
Well-known member
Don't Hold Much Hope....
....But I wish this would be the "offshoring" incident that resulted in NO SALE to the American public, sending an unmistakable message to Corporate America.
Sadly, We the Sheeple are putting up with a whole lot of stuff that would be within our power to change, if only we would vote with our feet and our pocketbooks.
....But I wish this would be the "offshoring" incident that resulted in NO SALE to the American public, sending an unmistakable message to Corporate America.
Sadly, We the Sheeple are putting up with a whole lot of stuff that would be within our power to change, if only we would vote with our feet and our pocketbooks.
cfz2882
Well-known member
sounds like the chinese jeeps will be just for sale in china-so far the only chinese road vehicles i have seen have been motorcycles and scooters,but the earlier versions of the chevy equinox came with a chicom version of the old 60*chevy v-6,could hear an earlier equinox coming from a half mile away with all the clattering and piston slap LOL.The castings of this engine looked nasty too-rough,porous.I suspect GM may have used this engine to get the equinox's foreign content up enough to classify it as an "import"-for CAFE reasons...
I'm still trying to understand how Chrysler went broke after seeing the ads a few years ago with Dieter Zetsche pitching the brand. At least Dieter lost less money selling Chrysler to the mooks at Cerberus, than Cerberus did buying that boat anchor company, and unloading it to the Italians (i.e., Fiat).
Selling Jeeps to the Chinese would be less cruel than Fiat trying to reintroduce their lousy cars to the U.S. market, after selling their foil-wrapped turds here in the '60s and '70s...
There's a name in Vegas for this kind of manuver, and it can't be described in polite company.
p.s. Seriously, what kind of car company besides Chrysler would put left-handed lug nuts on a car? That was in the 1960s, and it was all downhill from there.
Selling Jeeps to the Chinese would be less cruel than Fiat trying to reintroduce their lousy cars to the U.S. market, after selling their foil-wrapped turds here in the '60s and '70s...
There's a name in Vegas for this kind of manuver, and it can't be described in polite company.
p.s. Seriously, what kind of car company besides Chrysler would put left-handed lug nuts on a car? That was in the 1960s, and it was all downhill from there.
lowegian . . .
If you dislike Fiats that's OK with me but there is no reason for rudeness. I had three X1/9s ranging from a '77 to an '87 and found them to be wonderful cars, simple and inexpensive to maintain and delightful to drive. Forty years ago when things like double overhead cam engines, four wheel disc brakes and five speed gearboxes were almost unknown to American manufacturers excepting the Corvette or other specialty models Fiat happily sold low priced sedans with all those features. It was also Fiat who pioneered the modern transverse front wheel drive layout used in many cars today with the Autobianchi Primula of 1964. BMC did transverse engines first with the Mini in '59 and then the 1100 in '62, but all those had the transaxle in the sump and shared engine and gearbox oil which was problematical. Fiat instead designed a very compact transaxle mounted on the end of the engine, thus paving the way for the majority of modern cars.
I see nothing wrong with making Jeeps in China and selling them to the Chinese. If Jeep doesn't do it then another company will fill the demand and make the profit, some of that money might as well come here. GM does very well there with Buick, can't see any problem with that either.
If you dislike Fiats that's OK with me but there is no reason for rudeness. I had three X1/9s ranging from a '77 to an '87 and found them to be wonderful cars, simple and inexpensive to maintain and delightful to drive. Forty years ago when things like double overhead cam engines, four wheel disc brakes and five speed gearboxes were almost unknown to American manufacturers excepting the Corvette or other specialty models Fiat happily sold low priced sedans with all those features. It was also Fiat who pioneered the modern transverse front wheel drive layout used in many cars today with the Autobianchi Primula of 1964. BMC did transverse engines first with the Mini in '59 and then the 1100 in '62, but all those had the transaxle in the sump and shared engine and gearbox oil which was problematical. Fiat instead designed a very compact transaxle mounted on the end of the engine, thus paving the way for the majority of modern cars.
I see nothing wrong with making Jeeps in China and selling them to the Chinese. If Jeep doesn't do it then another company will fill the demand and make the profit, some of that money might as well come here. GM does very well there with Buick, can't see any problem with that either.
arbilab
Well-known member
No need to get huffy over car brands. Every one over 60 years has had a marque which in hindsight was laughable as an engineered product, including some of the most expensive.
At one recent time, BMW and Mercedes were tied in Consumer's for worst initial quality.
It took TWELVE returns to the dealer to get my 82 VW sorted, and it still overheated in a hot climate. There are more auto brands I would NOT buy than those I might. I won't list which are which, it surely would offend someone.
At one recent time, BMW and Mercedes were tied in Consumer's for worst initial quality.
It took TWELVE returns to the dealer to get my 82 VW sorted, and it still overheated in a hot climate. There are more auto brands I would NOT buy than those I might. I won't list which are which, it surely would offend someone.
Better Jeep owns the factory than someone fakes them - I believe that there already was a fake jeep sold in China.
I like the new Fiat 500, waiting to see how reliable they are before taking the leap (or a Volvo Amazon).
I like the new Fiat 500, waiting to see how reliable they are before taking the leap (or a Volvo Amazon).
philr
Well-known member
Lowegian,
Chrysler wasn't the only US manufacturer to put left-threaded nuts on their cars in the 1960's. GM did this too in the early sixties...
And China has been making Jeeps for years! I think were already selling XJ Beijing-Jeep Cherokees many years ago even before Chrysler bought Jeep back from Renault! The funny thing about this is that Chrysler bought Jeep just after Renault/AMC replaced the Chevy 2.8 and the Chrysler Torqueflite transmission with an updated version of the AMC inline 6 that Mexicans had already been installing in the VAM-Jeep XJ and an Aisin-Warner (Toyota) transmission. Chrysler didn't go back to one of their own transmissions and continued to use the Toyota transmission until the end of the production of the XJ Cherokees. They had at least one automatic transmission that didn't fail too often in their lineup!
The Chinese are also making/selling more Buicks in China now than in North America (Buick was the division with the left-threaded wheel nuts at GM so maybe this is related after all!)... And they get some fancier models than we do!
Chrysler wasn't the only US manufacturer to put left-threaded nuts on their cars in the 1960's. GM did this too in the early sixties...
And China has been making Jeeps for years! I think were already selling XJ Beijing-Jeep Cherokees many years ago even before Chrysler bought Jeep back from Renault! The funny thing about this is that Chrysler bought Jeep just after Renault/AMC replaced the Chevy 2.8 and the Chrysler Torqueflite transmission with an updated version of the AMC inline 6 that Mexicans had already been installing in the VAM-Jeep XJ and an Aisin-Warner (Toyota) transmission. Chrysler didn't go back to one of their own transmissions and continued to use the Toyota transmission until the end of the production of the XJ Cherokees. They had at least one automatic transmission that didn't fail too often in their lineup!
The Chinese are also making/selling more Buicks in China now than in North America (Buick was the division with the left-threaded wheel nuts at GM so maybe this is related after all!)... And they get some fancier models than we do!
The only thing with the foreign market is ANY car built here and shipped over there, cannot be sold, or driven on their roads, until it is 2 years old, yet they can send brand new cars here and we can buy them right away.....
fair trading should have equal rules set for both sides.......
fair trading should have equal rules set for both sides.......
Yogi, don't think you're quite right. Some Cadillacs and the Buick Enclave (mfd in US) sold in China are manufactured here in the US. There's a free market between Canada, US and Mexico. The Dodge Journey (mfd in Mexico) is available throughout Europe as the Fiat Freemont (and sells quite well).
whirlaway
New member
Lug Nuts
Chrysler was doing left lug nuts from the 1940s,I have a 48 and 56 Desoto with the same set up,they were really lug bolts not nuts,and when your driving it keeps them from coming loose,thats why they did it.Roads were not very good and folks lost lug nuts and wheels from potholes and the like.
Chrysler was doing left lug nuts from the 1940s,I have a 48 and 56 Desoto with the same set up,they were really lug bolts not nuts,and when your driving it keeps them from coming loose,thats why they did it.Roads were not very good and folks lost lug nuts and wheels from potholes and the like.
I just have never cared much for Jeeps. Maybe it because, I rolled a CJ5 well not me my friend did and I sold my Jeep after that.
It don't surprise me much about China because it's such a huge market and somebody else will is very true.
I loved the Fiat Abarth that I drove and I have thought about buying one but, it's kind a hard to justify car payments when my
Honda still runs so good.
It don't surprise me much about China because it's such a huge market and somebody else will is very true.
I loved the Fiat Abarth that I drove and I have thought about buying one but, it's kind a hard to justify car payments when my
Honda still runs so good.
Those Fiat Cars Sold By Chrysler
Cannot speak for elsewhere in the USA but here in NYC those little Fiat 500 cars are everywhere especially in Manhattan.
While not exactly everyone's cup of tea they seem perfectly suited to urban driving. Their size makes them rather easy to park in tight spaces which is all too common in NYC where often spots can be hard to find.
Cannot speak for elsewhere in the USA but here in NYC those little Fiat 500 cars are everywhere especially in Manhattan.
While not exactly everyone's cup of tea they seem perfectly suited to urban driving. Their size makes them rather easy to park in tight spaces which is all too common in NYC where often spots can be hard to find.
whirlcool
Well-known member
but in the rest of the country sales of the Fiat have been a dog. Chrysler fired the woman in charge of the importation of this car earlier this year. They are now offering 60 month 0% interest loans on them (to those who are VERY qualified).
It would make a nice "chic car", but I have seen men & women driving them. The Mini is the choice of Daddie's to give their little girl's as gifts.
It would make a nice "chic car", but I have seen men & women driving them. The Mini is the choice of Daddie's to give their little girl's as gifts.
A buddy of mine bought one of the first new 500s available and seems very pleased with it. It replaced an Alfa 164 which he loved and hated: he loved the Alfa's nice twincam V6, hated the very large size of that car. He commutes by himself so the 500 has more than enough space but he also has no complaints when he takes it on a 400 mile round trip from LA to Fresno to visit his elderly mother. His car is a base model as that's all that was available when he bought it, but it has adequate power, decent gear ratios and a good shift linkage so city driving is pleasant. I didn't have the chance to push it in a corner (not something I'd do with someone else's shiny new car!) so I can't comment much on the handling but Fiat typically gets that right. It didn't feel as special as one of my old X1/9s, but after a quarter-million miles and two decades of driving those I admit to being a bit prejudiced!
Lots of "Minis" Here As Well
One thinks the appeal of the Fiat 500 and similar "tiny" cars is they are easy to manouver and drive around often congested Manhattan. Again because of their size these small cars will fit where often the new Civic will not.
Indeed there seems to have been a size creep for small cars like the Civic, Beetle and so froth. Saw the 2012 VW Beetle in local garage and was surprised at how much larger it has grown. Still only a two door thing, but certainly larger than what one is used to seeing.
One thinks the appeal of the Fiat 500 and similar "tiny" cars is they are easy to manouver and drive around often congested Manhattan. Again because of their size these small cars will fit where often the new Civic will not.
Indeed there seems to have been a size creep for small cars like the Civic, Beetle and so froth. Saw the 2012 VW Beetle in local garage and was surprised at how much larger it has grown. Still only a two door thing, but certainly larger than what one is used to seeing.
Oh come on...
If its on the internet, it must be true, right? Did anyone bother going to the horse's mouth to check this out?
If its on the internet, it must be true, right? Did anyone bother going to the horse's mouth to check this out?
