Kenmore waterfall filter hose 91769

[ladyk]

Anybody know where I can find one of these hoses? Unfortunately mine broke at the bend where it mounts to the filter housing. Not much room to route a heater hose. Any suggestions are appreciated! Thank You!!!!

 

[yogitunes]

for to someplace like Lowes, a dishwasher hose with that 90 degree bend in it on one end works great...

it may be too long, but you can cut it, and also grab one of those dishwasher sink connectors, that will adapt that hose to the port of the pump....

ashame its not the right length, it would fit perfect, but we improvise

http://www.lowes.com/pd_14452-59288...rentURL=?Ntt=dishwasher+drain+hose&facetInfo=

 

[yogitunes]

so you may have to get one of these connectors to shorten it and connect to the pump...

you could almost route the hose along the top as to not have to disconnect everytime you open the top, but for some reason it wants to dribble water towards the filter during the spin and saturate the load.....it has to hang inside just like the original...

hope this helps....shop around for pricing, but this will get you in the right direction...

http://www.lowes.com/pd_50367-712-D...rentURL=?Ntt=dishwasher+drain+hose&facetInfo=

 

[AxxTxxM]

I used a Gates Part# 28480 (Product #42611696). You cut it to fit on both ends. It is a bit tight on the fittings, but you can stretch it on without too much hassle.

Gates 28481 (Product #42611697) would also work but is a lot longer. Not sure how the these hoses will hold up to detergents and bleach.