aeg03
Well-known member
The AEG 72640 machine I have is very good but one thing annoys me about it is that it almost on every wash cycle, it spins unbalanced. The machine itself is very good but this is the problem. It has been checked by an AEG service engineer in 2002 who says theres nothing wrong with it, he stripped it more or less.
The machine has spun so violently that the drum has hit the door a few times, not causing any damaged apart from a mark on the glass. I found out that some other people have had this with AEG and looking at some other vids on YouTube I can see other ppls AEG's spinning and making a fair bit of noise.
Anyone else with the same brand Electrolux group product or other such as Indesit etc have this problem?
I though from years ago that the use of Unbalanced sensors was to protect the machine but it seems that in this particular machine the programmer is only programmed to balance upto 5 mins and then if it cant balance it will continue into full spin anyway. Any with similar experiences?
The machine has spun so violently that the drum has hit the door a few times, not causing any damaged apart from a mark on the glass. I found out that some other people have had this with AEG and looking at some other vids on YouTube I can see other ppls AEG's spinning and making a fair bit of noise.
Anyone else with the same brand Electrolux group product or other such as Indesit etc have this problem?
I though from years ago that the use of Unbalanced sensors was to protect the machine but it seems that in this particular machine the programmer is only programmed to balance upto 5 mins and then if it cant balance it will continue into full spin anyway. Any with similar experiences?