Maytag A712 with LoadSensor and 180 Degree Stroke Trans

[scrubflex]

fewer parts, less break-downs...love to learn how to add a switch to the timer motor...it really does and the 50 cycle motor pulley and belts would enhance the agitation so, you may be able to add more clothes for even bigger loads
...I used a GALLON container filled her to each LOAD SIZE water level---SMALL: 8 1/2 gallons---MEDIUM: 11 7/8 gallons---LARGE: 15 3/4 gallons and EX LARGE: 19 1/2 gallons...cont' the bottom of the Power-fin agitator's lint filter top/upper SLOT: 20 gallons...the TOP row of tub holes: 21 gallons...3/8" from the tip of the Power-fin's RIB-VANE: 22 gallons and the bottom of tub RIM is 23 gallons...I love the swirl-away spins, I wish there was some way I could increase the force of water SPRAYS in my A712 to remove more dirty lint laden water down the drain

 

[tolivac]

It would be more awesome if you filled up the tub ALL THE WAY!!!!Not enough water to make good use of that agitator.Only the base blades are working.The auger is doing NOTHING.

 

[akronman]

every machine I restore/repair/buy

I immediately add a switch to the timer motor. That way I can watch and customize for every single load I wash

 

[scrubflex]

I would love to customize my wash cycles...everyone knows that Kenmore's dual action agitator that have the 20 degree 'undercut' spiral vane are the best ever designed. But, Maytag Atlantis MAV9750AWW HydroFlex agitator have a 'double' spiral vane which is next in line. I think I'll get a HydroFlex spiral vane for my LoadSensor.