not exactly......what your talking about is moving, or rather turning the fill flume a little to direct the spray onto the clothes, more than behind the tub.....it sprays by way of hitting the balance ring, and splattering out....each machine fals a little different, for example of this machine I am working on, the flume is more towards the 9 o'clock position, some are more near the 11 o'clock...but if you note in the pics, I can turn it some to change the direction....
there is a before and after for the air gap, first the original, and then with the replacement of a 3/4" CPVC piece of pipe and a few clamps, secured in place, good as new, no more leaks.....
from the back removing just the valve holder to gain access.....remove 8 screws, and take off the solenoids....remove the oblong plug from the top, and using pliers or a small screwdriver, remove the restrictor, replace that plug, slide the solenoids back on, and secure with the screws, and hook up yor water again....easy as pie
the last pic, although I have to get more, there is an extra slot on some motor tracks for the third spring, as this one goes next to the left one.....just gives it a little more grip....
hope this helps.....if you need more info, let me know....
