We have had our Miele G7166 for almost a year now and have been very pleased. Everything comes out flawlessly. I’ve set the default AutoDos dispense amount (in settings) to decreased and everything still comes out looking great. (Especially glasses and flatware.)
I’ve been curious about if it dispenses any detergent in the Prewash phase or if it is only in the Main Wash phase.
Here is what I found:
I ran a Pots / Pans cycle and measured the weight of the PowerDisk before starting the cycle, at the end of the Prewash then in the middle of the Main Wash
For reference my water hardness is set at 16 dH and the AutoDos dispense volume is set to decreased.
Disk was 429 g at cycle start
423 g at end of Prewash
412 g after Main Wash dispense
It looks like the machine does dispense a small amount (6 g) in the Prewash (consistent with what the manual says for adding a small amount of detergent [when not using AutoDos and manually dispensing]for cycles that have a Prewash phase).
I checked the disk weight at two different times in the Main Wash and it was consistent. 11 g was dispensed for the Main Wash.
The thing I find interesting is that the dispensed amounts were not in increments of 7 g which is what I thought was the amount dispensed for each disk rotation. So, there must be something else that is coming into play.
Anyone know any of the logic that is used for AutoDos dispensing?
Bob
I’ve been curious about if it dispenses any detergent in the Prewash phase or if it is only in the Main Wash phase.
Here is what I found:
I ran a Pots / Pans cycle and measured the weight of the PowerDisk before starting the cycle, at the end of the Prewash then in the middle of the Main Wash
For reference my water hardness is set at 16 dH and the AutoDos dispense volume is set to decreased.
Disk was 429 g at cycle start
423 g at end of Prewash
412 g after Main Wash dispense
It looks like the machine does dispense a small amount (6 g) in the Prewash (consistent with what the manual says for adding a small amount of detergent [when not using AutoDos and manually dispensing]for cycles that have a Prewash phase).
I checked the disk weight at two different times in the Main Wash and it was consistent. 11 g was dispensed for the Main Wash.
The thing I find interesting is that the dispensed amounts were not in increments of 7 g which is what I thought was the amount dispensed for each disk rotation. So, there must be something else that is coming into play.
Anyone know any of the logic that is used for AutoDos dispensing?
Bob