roberth58
Member
After months of looking, I finally found one 40 miles away on craigslist. Unfortunately the description was a little embellished. It does pump and drain but not well. I have taken the assembly apart and these are the parts it looks like I need to find.
Support #29 - the white collar is completly loose.
Impeller #5 - found half of it in small pieces, mostly jammed in the lower wash arm.
O-ring #6 - pretty much shot.
Support #7 - large piece broken where it goes around the shaft.
Cover #26 - heavily worn away on one side where it goes around shaft.
Washers/Spacers #9,10,11,12 - completely missing.
Worst part is I already installed it and promised my kenmore to my sister. Now I look like a complete dork.
If anyone can help with these parts please let me know and thank you to Stevet for the diagram.
Bob
Support #29 - the white collar is completly loose.
Impeller #5 - found half of it in small pieces, mostly jammed in the lower wash arm.
O-ring #6 - pretty much shot.
Support #7 - large piece broken where it goes around the shaft.
Cover #26 - heavily worn away on one side where it goes around shaft.
Washers/Spacers #9,10,11,12 - completely missing.
Worst part is I already installed it and promised my kenmore to my sister. Now I look like a complete dork.
If anyone can help with these parts please let me know and thank you to Stevet for the diagram.
Bob
