New owner of a 2015 Speed Queen TL washer!

[billiedyer1954]

indexing

the drum only turns when the washer is new. after the brakes wear in it stops. I have a 2012 model. it took mine about a month to stop. trust us, this is normal

 

[bladeandstone]

Thank you both. I spoke with alliance tech support and they confirmed. Appreciated!

 

[washman]

Re:indexing

all are correct.

Vid 1 of my machine right after I got it.


Vid 2


Vid 3

 

[gusherb]

Mine didn't index alot from the beginning but stopped completely around 7 months into owning it.

 

[mamapinky]

Bought my Speed Queen last August the drum still moves maybe an inch back and forth but it makes a thump thump thump sound doing it...should I be concerned?

 

[mtn1584]

No, that's the sound of the tub moving back and forth as the brakes hold the tub during agitation. This sound is normal.
Mike

 

[mamapinky]

Mike, thank you, I can stop worrying now...I had a time getting on here to post a thank you ..this post is getting looong. Again Mike Thank You....Cheryl

 

[mtn1584]

No problem

Enjoy your washer!!
Mine is going on seven years old now. I have the AWN542.
Mike

 

[iiijohnnymaciii]

Does anyone have an awne9 with pictures of the control board and the main board? Or a service manual for the 9 series. I have an 8 series, but was looking to wire mine as a 9 series for the longer wash times. When I bought my 8 series back in Feb, they didn't have anymore 9 series left. However, I noticed that my control board is a 9 series, just with the 8 series sticker. I'm thinking the main board is a 9 series with just a different wiring configuration as well.

 

[iiijohnnymaciii]

Here are pictures of my AWNE8 control board and main board to compare.

 

[iiijohnnymaciii]

Update:

I wasn't able to find a service manual, but I did find a parts list! The output board and wire harnesses were all the same. The only thing different was the control board. I found a new 9 series control board on eBay and installed it. It worked! Having 3 kids, the soak feature and longer wash times come in handy. I used to have to pause my 8 series to soak and after it filled, reset it to get longer wash times. This makes it much easier on me. Anyway, I just wanted to throw this update out there for anyone that bought a 2017 Speed Queen in 2018, but wanted a 9 series and couldn't find one.

 

[gusherb]

Over 3.5 years has passed since I got the washer and now the time has come for a new dryer. Unfortunately I wasn’t able to get the matching dryer last year before they sold out, so now I have to settle for the DR7 with the new console design. I was deciding between the DR7 or the commercial style Maytag which was $150 cheaper, neither were my first choice as the one I wanted (29” WP) can only vent out the rear and I need it to vent bottom center through the floor, which the 27” WP design Maytag, and the SQ can do.

I’ll probably make a separate thread for it after it comes next Friday if anyone shows interest.