I've never had a 40-inch range but this one looks as if it's pretty good shape. But oh, that refrigerator! I just could make out the 'N' in the model number in one of the posted photos so it looks like a 1956 set up for grabs here.
Nice looking GE range and refrigerator - $350 OBO Worcester MA
- Thread starter turquoisedude
- Start date
Help Support :
The range is older than the fridge, like early 50s or so, based on magazine ads.
ovrphil
Well-known member
GE LHI2NB or LH12NB
Either a number one or letter "I"...for what it's worth, Paul.
Either a number one or letter "I"...for what it's worth, Paul.
Got back about 1 hour ago with both. About 7 hours round trip. I was only interested in the refrigerator which I indicated when I called this morning in reply to the ad. After getting there I was told that the range would probably get scrapped and if I wanted it to take it. I hated hearing the range would be scrapped so I brought it home. I paid $125.00.
ovrphil
Well-known member
Ken -
7 hours, not too bad, hopefully(no accidents or road construction) - photos of fridge later, right? Congrats!
7 hours, not too bad, hopefully(no accidents or road construction) - photos of fridge later, right? Congrats!
Looks like a great fridge, Ken, hope everything works!
Both were still being used in a lake rental. I didn't ask if the rental was year round or seasonal. Fridge still had some water in it from defrosting. The deep cooking pot of the range was about full of cooking oil.
The trip went smoothly overall. There was some backup on I80 (Mass Tpke) both ways at Springfield area but not bad. We kept moving along slowly. Probably lasted all of 5 minutes.
Something that did get me nervous concerned the control panel of the range. It was very windy here yesterday. From here at home all the way out to MA. We stood the range up behind the cab of my truck facing backward. The control panel stuck up above the top of the cab. Highway speeds combined with a very strong headwind had the range moving a little. It couldn't actually tip over due to it being up against the top of the fridge which was laying down in the truck bed.
But then the control panel itself started to move and the joint at the bottom where it sits on the range started to open up. I was afraid it was going to come off. I decided it prudent to keep my speed in the low to mid 50s. As I got closer to home the wind died down so I was able to drive a little faster but didn't go over 60. So the trip back took longer than going out.
I'll post some pics as soon as I can.
[this post was last edited: 6/13/2016-10:19]
The trip went smoothly overall. There was some backup on I80 (Mass Tpke) both ways at Springfield area but not bad. We kept moving along slowly. Probably lasted all of 5 minutes.
Something that did get me nervous concerned the control panel of the range. It was very windy here yesterday. From here at home all the way out to MA. We stood the range up behind the cab of my truck facing backward. The control panel stuck up above the top of the cab. Highway speeds combined with a very strong headwind had the range moving a little. It couldn't actually tip over due to it being up against the top of the fridge which was laying down in the truck bed.
But then the control panel itself started to move and the joint at the bottom where it sits on the range started to open up. I was afraid it was going to come off. I decided it prudent to keep my speed in the low to mid 50s. As I got closer to home the wind died down so I was able to drive a little faster but didn't go over 60. So the trip back took longer than going out.
I'll post some pics as soon as I can.
[this post was last edited: 6/13/2016-10:19]
Good deal!
Well I already have four other 40" GE ranges. A 53, 54 & two 56s. All those have double ovens. That's why I wasn't really wanting this one but I couldn't see leaving it to be scrapped.
BTW...The fridge has the foot pedal bar that stretches across the full width of the cabinet. I searched online today for images of 1956 GE refrigerators and see some had plain aluminum colored accents and others with copper colored. This one has copper colored scratch guards under the handles. Also the shelves, door storage bars, butter compartment door and full freezer interior are copper.
BTW...The fridge has the foot pedal bar that stretches across the full width of the cabinet. I searched online today for images of 1956 GE refrigerators and see some had plain aluminum colored accents and others with copper colored. This one has copper colored scratch guards under the handles. Also the shelves, door storage bars, butter compartment door and full freezer interior are copper.
Copper sounds very classy, like the Filter-Flo pans back then. Our '57 Combo had aluminum trim. The foot pedal thingy was very handy, too. Looking forward to more pics!
Nice range!
This is my favorite GE range until the '57 models were introduced.
This style cabinet was made from model years '49 - '52, before production moved to Appliance Park in Louisville, KY.
Below is a film about the range you got.
This is my favorite GE range until the '57 models were introduced.
This style cabinet was made from model years '49 - '52, before production moved to Appliance Park in Louisville, KY.
Below is a film about the range you got.
So Id like to determine the exact year of the range. The first # is referred to as Cat # rather than Model # and is D21-J1. Im finding the Serial # strange.
It's 8441760. No letters as usually found in GE Serial numbers to designate month and year. Any thoughts?
It's 8441760. No letters as usually found in GE Serial numbers to designate month and year. Any thoughts?
