I almost forgot!
In the seventh picture, I mentioned that the white washer in the middle had a funny story to it. Actually, the washer with the walnut colored plastic control panel does too, but I'll start with the white one in the middle.
When I get these Arizona washers, my contact out there sends me e-mails with pictures of each machine and the model/serial number. There were two in this batch that didn't have model numbers. I figured they had just fallen off. One of them is the middle white washer, but I knew it to be a 1970 or 1971 model, and was a little surprised to see the notched lid, as this was a 1972 iteration and there was a separate version of this washer in 1972 which had different console coloring, so I couldn't understand why KM kept the original in production.
This was back in the fall - the machines made their way to my Phoenix warehouse connection quickly and then began their cross-country journey in January. When the machines arrived here, I opened each package to see what I got, like a kid at Christmas. I was not entirely enthused about the white 1970 because of the worn panel, etc but was curious about it.
When I opened the lid, I was very surprised, needless to say. The 1970 model is actually a hybrid - the control panel of a 1970/71 and the rest is from a 1980 Kenmore 200 series BOL washer. Upon opening the lid I expected to have a gold Super Roto-Swirl greet me with a softener dispenser on top with a standard capacity tub. NOPE! Instead there was a large 18lb. basket with a Penta-Vane!
After thinking about what models this washer started out as, I nailed it down to one specific model - the 1980 200 series due to it's lack of lint filter, the painted top and lid (not porcelain), and the plastic lid hinges which debuted that year.
I am actually now hoping to bring this machine back to it's glory. The cabinet and top/lid are in phenominal condition. I have one of these that was only in service from 1980 to 1993, and it is all rusted and deteriorated from being on the east coast.
This model offered an ivory colored plastic control panel, two cycles (normal and permanent press), timer set temps, no water level adjustment, and a white control knob. If anyone knows of a donor control panel and timer bezel that could go back onto this machine, I'd be ecstatic!
More pics to follow tonight.
Gordon