Retro Clothesline

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

bajaespuma

Well-known member
Platinum Member
Joined
Mar 16, 2006
Messages
6,258
Location
Connecticut
Hey all you handy people: I want to put up one of those old clotheslines that hang between two wooden posts. Looks like the illustration below. Can I purchase these posts anywhere or do I have to strap on the snap-ons and actually fabricate the things? Any advice appreciated.

5-22-2008-10-23-49--bajaespuma.jpg
 
Just beware of what it's pressure-treated WITH. The arsenic treated ones (if still generally avaialable) are not worth the health hazards, IMHO. And if you do have to snap-on some tools, be especially aware of the saw-dust generated etc. HIGHLY POSIONOUS. HEED ALL WARNINGS.

There was a special on this where "Their D-I-Y dreamhouse permanently robbed them of their health by taking lightly manny's warnings."

I'm just sayin'............
 
I bought some pressure treated wood at Home Depot for a fence repair and I asked them to cut the wood to size. The guy pointed to a sign by the saw which said that they won't cut it due to the health hazards of pressure treated wood. The guy said that when I cut it myself at home, I should wear a mask.
 
Go Metal!

You will probably be happiest if you go with metal posts, rather than wood. Even pressure-treated wood rots when set into the ground- it takes longer than with untreated wood, but it will happen eventually.

What will happen is, one fine day you'll be hanging clothes, and the weight of the clothes will be too much for the rotted portion of the posts- which you cannot see or judge, because it's underground. There will be an ominous, sickening-sounding C-RRRRRRRRR-AAAAAAAAAAAAAAA-CK!, and your nice clean laundry will be all over the ground.

Good galvanised metal posts will make for much greater longevity. If you'll paint them with hunter green Rustoleum, they'll be very unobtrusive in your yard, and they'll probably outlast you.
 
P.S.:

I looked at Mike's link to the metal posts on the Do It Best site; they're priced at $31.49 each. That makes a pair of them $62.98. You probably can't buy all the needed pressure-treated lumber and hardware to make your own wooden posts for that.

Hint: If you go with metal, setting the posts in concrete makes for a very nice, secure installation. If you'll bevel the concrete where the post comes out of it (see sketch below), that will help keep rainwater away from the posts and prevent rust.

P.S.: If you know someone who welds, clothespoles are a great welding project, and you can design something that looks even nicer than the ready-made ones. How about something inspired by the Arts & Crafts period, or Art Nouveau, or Colonial Williamsburg, or Frank Lloyd Wright? It has been done...

5-22-2008-13-17-45--danemodsandy.jpg
 
leaching

I designed and built several larger planter boxes for my mom last year (3'x 5' and bigger) and considered using pressure treated wood. One look at the warning sheet which is prominently posted next to the lumber and that was that for me!
Among the many dire threats and disclaimers, the manufacturer also warned that the chemicals might well leach into the surrounding earth.
Went with plain old red-wood. Not cheap, but at least I don't have to worry about someone planting vegetables in one of them a few years down the road and poisoning their family.
Regardless of whether you use metal or wood, it would not be difficult to design the system so that you could stick the posts into holes in the ground and then remove them at the end of the drying season, respectively when you need the area for other purposes. Indeed, with a bit of fore-thought, those holes could be used to anchor other outside constructions such as a sun-roof or mosquito-netting, etc.
You'd have to give some thought to safety - but the need to keep water and ick out of the hole when not in use would require a cap, anyway. Or a flagstone over it...
Just a thought.
(Personally, I think wood looks nicer, properly taken care of there is no reason why you can't get 20-25 years service out of redwood.
 
Local Hardware Store

Got this one for $50.00 Bucks. Love it. So far , been using it for over a month, Dropped $ 47.00 off the electric bill. I run the clothes through the dryer for 5-10 min. Then Hang outside. Great Outdoors aroma.

5-22-2008-18-55-30--toploader55.jpg
 
Donkey shine

Thanks to all of you for the good advice and warnings. You've all given me a most righteous idea that even Lucy and Ethel would be proud of.

Polkanut--LOVE that Freudenthal thing!!!! I wonder how much it would cost to have it shipped. Best of all, it would just piss the shaving cream off my neighbors.
 
jut hanging around

i have my clothesline in the basement. it hangs from the ceiling rafters with galvanizd angleiron bars that are bolted together. the predrilled holes spaces the lines(6 total) evenly apart. they not only save a lot of electricity the clothes have a clean crisp scent
 
IIRC when we bought ours 2 yrs. ago, it was around $120, but the guy we bought it from also installs barn equipment from them. Call the 800 number in the link, it never hurts to ask. Good luck, and I'm happy to hear it'll tick off the neighbors.
 
I can't install a line--I live in a rental property. But I do have and use a wood drying rack. (Actually, I have two.) It's nice because it can come in during bad weather, and go out during warm weather.
 
Geez Mr Toploader showing us your unmentionables...nice ones I must say...I too have been wearing boxers lately but sometimes ya know my boys need a home to lay in if you know what I mean..so I alternate from boxers to briefs. Wow so off topic but I couldnt resist.
 

Latest posts

Back
Top