SPEED QUEEN SOLID TUB WASHER UP AND RUNNING!

Automatic Washer - The world's coolest Washing Machines, Dryers and Dishwashers

Help Support :

rollermatic

Well-known member
Joined
Oct 10, 2009
Messages
2,068
Location
columbus and milford ohio
haven't done a thread in a while so here goes! got my speed queen washer back together this past march, bought it back in late 2010! just now posting it! been a busy summer!

here it is in the jeep after getting it that day from indianapolis. i still had a soft top on my car back then and remember what a cold day it was!

rollermatic++7-23-2012-22-14-9.jpg
 
pic from back of machine

showing pump and motor and rusty bottom when i first got it.

a few coats of rusty metal primer did wonders to this area! and all 3 belts were fine and able to be used! at least they are fine now! hopefully if they break i can find more!

rollermatic++7-23-2012-22-34-39.jpg
 
close up view

of drain pump.

this pump is fine and has no leaks although i did have to get a pump gasket for it. luckily i found the gasket at partselect.com. it was one of the few parts they still carried for this washer!

rollermatic++7-23-2012-22-37-40.jpg
 
pump is

out.

don't like the look of that output port. pretty chewed! it will eventually erode away to the point where a hose will not fit on.

gave it about 10 coats of primer, inside and out! and i'm only using this washer for fun about once a month.

rollermatic++7-23-2012-22-43-55.jpg
 

Latest posts

Back
Top