Mine has 2 wires going to a switch on front "extra rinse", not full blown different, but just a few wires are going to a few different spots on the timer. My concern though is my machine seems to have "extra rinse" after each cycle, which means the timer is a different model which worries me if the water fill contacts are cycled in the same manner as the above chart or if there is a 3rd contact in the timer in series with the extra rinse switch which closes to fill up for a final rinse. (violet wire for the cold goes back into the timer where it might also connect to an internal jumper to the extra rinse switch or the like)
Just don't want to cut the wrong wires and find latter something is not right.
But anyways, thanks for the help!
Just don't want to cut the wrong wires and find latter something is not right.
But anyways, thanks for the help!
